Search

Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XT38 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The XT38 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK38 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK38 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The XTK38 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 offers users an optimum price/performance ratio. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK67 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT67 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines or with CERAMICON technology are recommended. Applications: The XT67 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK67 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK67 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines or with CERAMICON technology are recommended. Applications: During use, the XTK67 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 125 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. • Reduced burr formation • High cutting speed • Fewer sparks • Low edge cavitation Machine suitability: The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.

Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XT38 X-LOCK cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT38 X-LOCK has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The XT38 X-LOCK offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 X-LOCK offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimensions: The extra-thin X-LOCK cutting disc has a disc width of 1.0 mm or 1.5 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Zircon flap disc. Thanks to its three cut-outs, the VISION PRO is transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view of the workpiece • Controlled material abrasion • Especially suitable for work on steel Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION PRO flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION PRO utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION PRO gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.

Pin for mounting the matching non-woven cleaning tools SVS GS.  • With 6 or 8 mm shank Machine suitability: The RHODIUS SVS PIN is needed for mounting the RHODIUS SVS GS non-woven cleaning abrasive. This product is designed for use with a straight grinder. Dimensions: The RHODIUS SVS PIN is available with a 6 mm and 8 mm shank.

Backing pad for fibre discs – flexible to ensure optimum adjustment to the workpiece. • More flexible backing pad • Optimal adaptation to the workpiece • Pleasant grinding Machine suitability: The threaded socket for the angle grinder spindle is M14x2 or 5/8” with this backing pad. Applications: The RHST backing pad is comparatively soft and flexible, and therefore especially well-suited to the processing of concave surfaces. Dimensions: This backing pad is available in diameters from 100 mm to 180 mm.

Expanding body for abrasive sleeves with a 6 mm shank. Especially durable and stable due to high-quality rubber. • Long lifetime • Medium hardness • Ventilation for cooler grinding Machine suitability: This RHODIUS expanding body for abrasive sleeves is designed for use with a straight grinder or with a flexible shaft drive machine and a 6 mm shank spindle. Structure and production: The high-quality rubber material used here makes the product especially durable and stable. This expanding body for medium-hard abrasive sleeves also offers an ingenious system of special air vents. These keep the workpiece cooler and therefore reduce the thermal stress on the material. Quality: The SHEK expanding body gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. This product has been perfectly coordinated to the RHODIUS SSH and ESH abrasive sleeves. Dimensions: This expanding body is available in a range of variants, from 15 mm x 30 mm, 22 mm x 20 mm, 25 mm x 25 mm and 30 mm x 20 mm to 45 mm x 30 mm.