Search

Non-woven cleaning abrasive with ceramic high-performance abrasive grain. For powerful cleaning performance and an extremely long lifetime. • Stable edges • Top cleaning performance • With ceramic high-performance abrasive grains Machine suitability:: The SVS HD non-woven cleaning abrasive is designed for use on an angle grinder with a 22.23 mm spindle. An adjustable-speed angle grinder must be used with this product. The non-woven material will melt if the speed is too high. The optimum speed range is from 3,000 to 7,000 rpm. Material suitability:: This product is the ideal choice for removing rust or paint, and has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. The product can also be used to remove GFRP and body filler as well as for working on wood. Construction and manufacture:: This non-woven cleaning abrasive is made from high-performance ceramic abrasive grain and has very high edge strength. With this tool, the user benefits from a long tool lifetime and superior cleaning performance. The open design prevents clogging, while the high grit concentration yields excellent results when tackling rust and paint. Quality:: With the SVS HD, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: The SVS HD remains the tool of choice even for cleaning high-strength steels, metal sheets, structural and tool steels. Dimensions:: The non-woven abrasive disc is available in the diameters of 115 mm and 125 mm. Industry:: The RHODIUS SVS HD non-woven abrasive disc is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Stainless steel bevel brush with crimped stainless steel wire, for use on angle grinders. • For flexible working • For careful cleaning • Combines the advantages of cup and wheel brushes. Machine suitability:: The EKBW technical brush is designed for use on angle grinders equipped with an M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Construction and manufacture:: The fill material used for the EKBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality:: The EKBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: A bevel brush is the perfect tool for processing corners and hard-to-reach places while also being ideal for surface cleaning work. Combining the advantages of cup and wheel brushes, this tool is a popular choice for cleaning and roughing work. This RHODIUS bevel brush for stainless steel is the perfect tool for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions:: The wire thickness for the EKBW is 0.30 mm. This end brush is available with a diameter of 100 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

End brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. • Brush colour red: coarse = K80 (SIC) • Brush colour blue: fine = K180 (AO) • Suitable also for structuring wood Machine suitability:: The HPB technical brush is designed for use on a handheld drill with a drill chuck. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Construction and manufacture:: The fill material used for the HPB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality:: The HPB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions:: This bevel brush is available with a diameter of 25 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel wheel brush with crimped stainless steel wire on a 6 mm shank. • For flexible working • For careful cleaning • Homogeneous surfaces Machine suitability:: The ERBW technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Construction and manufacture:: The fill material used for the ERBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality:: The ERBW gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for stainless steel is the optimum choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions:: The wire thickness for the ERBW is 0.20 mm. This wheel brush is available in the diameters of 30 mm, 40 mm and 60 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel wheel brush with crimped stainless steel wire on a 6 mm shank for use with handheld drills. • For flexible work • For gentle cleaning Machine suitability:: The ERBWBM technical brush is designed for use on a handheld drill with a drill chuck. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Construction and manufacture:: The fill material used for the ERBWBM is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality:: The ERBWBM provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for stainless steel is the optimum choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions:: The wire thickness for the ERBWBM is 0.30 mm. This wheel brush is available with a diameter of 100 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Wheel brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. • Long lifetime • Uniform grinding performance through permanent release of grain • Suitable also for structuring wood Machine suitability:: The HRB technical brush is designed for use with a handheld drill or an angle grinder with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Construction and manufacture:: The fill material used for the HRB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality:: The HRB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions:: This wheel brush is available in the diameters of 75 mm, 100 mm and 140 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel cup brush with crimped stainless steel wire, for use on angle grinders. • For flexible working • For careful cleaning • Efficient processing of large surfaces Machine suitability:: The ETBW technical brush is designed for use on angle grinders equipped with an M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Construction and manufacture:: The fill material used for the ETBW is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality:: The ETBW gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions:: The wire thickness for the ETBW is 0.30 mm. This cup brush is available with a diameter of 65 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Cup brush with abrasive grinding bristles for working on stainless steel, steel, wood and non-ferrous metals. • Brush colour red: coarse • Brush colour blue: fine • Suitable for structuring wood Machine suitability:: The HTB technical brush is designed for use with a handheld drill or an angle grinder that is equipped with a 6 mm or M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability:: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Construction and manufacture:: The fill material used for the HTB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality:: The HTB provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions:: This cup brush is available in the diameters of 50 mm, 75 mm and 130 mm. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel hand scratch brush with crimped stainless steel wire inserts for gentle cleaning. • For flexible work • For gentle cleaning Machine suitability:: The EHBW brush is used for manual brush work. Material suitability:: This brush has been designed not only for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, but also for aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Construction and manufacture:: The fill material used for the EHBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality:: The hand scratch brush is made from beechwood. Beech is neither too soft nor too hard, is comfortable to hold and creates a splinter-resistant handle. This kind of tool can be used to achieve excellent cleaning results. The EHBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: This hand scratch brush can be used anywhere. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush for stainless steel is the ideal tool for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions:: The wire thickness for the EHBW is 0.30 mm. This hand scratch brush is available in variants with 2, 3, 4 or 5 rows of brush wire. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Brass hand scratch brush with crimped wire inserts for gentle cleaning. • For flexible working • For careful cleaning Machine suitability:: The MHBW brush is used for manual brush work. Material suitability:: This brush has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. and produces optimum working results on these materials. Construction and manufacture:: The fill material used for the MHBW is high-quality crimped and brass-plated steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality:: The hand scratch brush is made from beechwood. Beech is neither too soft nor too hard, is comfortable to hold and creates a splinter-resistant handle. This kind of tool can be used to achieve excellent cleaning results. The MHBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Application:: This hand scratch brush can be used anywhere. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush is also an ideal choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions:: The wire thickness for the MHBW is 0.30 mm. This hand scratch brush is available in variants with 2, 3, 4 or 5 rows of brush wire. Industry:: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Note:: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.