Search

Machine suitability: The SPBWK technical brush is designed for use with a handheld drill or a straight grinder with a 6 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the SPBWK is high-quality plastic-bonded and crimped steel wire. This plastic bond means the wire cannot break off. Instead, the wire tips wear down gradually over time. The end result is a brush that lasts up to ten times longer. Quality: The SPBWK gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the SPBWK is 0.30 mm. This end brush is available with a diameter of 24 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel end brush with crimped steel wire, for use on straight grinders and drills. • For precision work • Brass-plated for improved corrosion protection • MPBW: Moulded in plastic for up to 10 times longer lifetime. Machine suitability: The SPBW technical brush is designed for use with a handheld drill or a straight grinder with a 6 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the SPBW is high-quality crimped steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The SPBW gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the SPBW is 0.30 mm. This end brush is available in the diameters of 17 mm, 25 mm and 30 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Steel end brush with crimped steel wire, for use on straight grinders and drills. • For precision work • Brass-plated for improved corrosion protection • MPBW: Moulded in plastic for up to 10 times longer lifetime. Machine suitability: The MPBW technical brush is designed for use with a handheld drill or a straight grinder with a 6 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for this MPBW brush is a high-quality brass-plated wire. This makes the wire corrosion-resistant. The brush is an ideal tool for creating the demanding surface finishes required by non-ferrous metals (NF metals). Quality: The MPBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the MPBW is 0.30 mm. This end brush is available with a diameter of 25 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Stainless steel hand scratch brush with crimped stainless steel wire inserts for gentle cleaning. • For flexible work • For gentle cleaning Machine suitability: The EHBW brush is used for manual brush work. Material suitability: This brush has been designed not only for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, but also for aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: The fill material used for the EHBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush is made from beechwood. Beech is neither too soft nor too hard, is comfortable to hold and creates a splinter-resistant handle. This kind of tool can be used to achieve excellent cleaning results. The EHBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This hand scratch brush can be used anywhere. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush for stainless steel is the ideal tool for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the EHBW is 0.30 mm. This hand scratch brush is available in variants with 2, 3, 4 or 5 rows of brush wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Universal hand scratch brush with crimped wire for gentle cleaning of stainless steel, steel or non-ferrous metals (depending on wire inserts). • Ergonomic plastic handle • For flexible working • For easy cleaning Machine suitability: The UHBW brush is used for manual brush work. Material suitability: Depending on the variant, this brush is designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: Depending on the variant, the fill material used for the UHBW is high-quality crimped steel or stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush features an ergonomic, non-slip handle. This kind of tool can be used to achieve excellent cleaning results. The UHBW gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS brushes from the premium PRO line are recommended. Applications: This hand scratch brush can be used anywhere. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush for stainless steel is the ideal tool for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the UHBW is 0.30 mm. This hand scratch brush is available in variants with rustproof wire, brass wire or steel wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Brass hand scratch brush with crimped wire inserts for gentle cleaning. • For flexible working • For gentle cleaning Machine suitability: The MHBW brush is used for manual brush work. Material suitability: This brush has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. and produces optimum working results on these materials. Structure and production: The fill material used for the MHBW is high-quality crimped and brass-plated steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush is made from beechwood. Beech is neither too soft nor too hard, is comfortable to hold and creates a splinter-resistant handle. This kind of tool can be used to achieve excellent cleaning results. The MHBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This hand scratch brush can be used anywhere. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush is also an ideal choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions: The wire thickness for the MHBW is 0.30 mm. This hand scratch brush is available in variants with 2, 3, 4 or 5 rows of brush wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Spark plug brush with brass wire for cleaning contact surfaces. • Small and practical • Careful cleaning of contact surfaces Machine suitability: The ZKB spark plug brush is used for manual brush work. Material suitability: This brush has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. and produces optimum working results on these materials. This is the ideal tool for cleaning electrodes and terminals on spark plugs. Structure and production: The fill material used for the RHODIUS ZKB spark plug brush is crimped brass wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush is made from beechwood. Beech is neither too soft nor too hard, is comfortable to hold and creates a splinter-resistant handle. This kind of tool can be used to achieve excellent cleaning results. The ZKB spark plug brush gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This spark plug brush is a very versatile tool. Users looking to achieve superior roughing, de-rusting or cleaning results will always reach for this quality brush. This RHODIUS hand scratch brush is also an ideal choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions: The wire thickness for the ZKB is 0.30 mm. This hand scratch brush is available with 3 rows of brush wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.