Search

High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FT38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT38 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FT38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. • Long service life • Comfortable cutting behaviour • Easy cutting Machine suitability: For freehand use, the FT26 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT26 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium silicon carbide (SiC) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The FT26 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, supports, sections and panels. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ultra high-performance freehand cutting disc for demanding user requirements. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FT67 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT67 has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT67 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FT67 offers an impressively long lifetime (tool life) as well as an aggressive cut. Precise work when processing thin-walled material is also easy to achieve. The disc features low dust generation and exceptional, vibration-free operation. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimensions: The freehand cutting disc has a disc width of 2.5 mm and is available in diameters from 115 mm to 230 mm. Industries: This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, in foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Versatile cutting disc that offers a good price-performance ratio. • High cutting speed • Comfortable cutting behaviour • Easy cutting Machine suitability: The FT33 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT33 has been especially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the FT33, users get a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The FT33 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, in foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

The industry-standard metal cutting disc for the cost-conscious professional. Cuts easily with a good service life. • High cutting speed • Easy cutting • Comfortable cutting behaviour Machine suitability: The KSM cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The KSM has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Applications: The KSM offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, supports, sections, panels and beams. Dimensions: The freehand cutting disc has a disc width of 3.0 mm and is available in diameters from 115 mm to 230 mm. Industries: This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation.

Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FT24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT24 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FT24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 125 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. • High cutting speed • Cool cut • Easy cutting Machine suitability: The FT44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FT44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FT44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimensions: With a disc width of 2.5 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Ensures a long and gentle operating time of the battery. 10 x XT15 ACCU in the re-closable tin box. • Optimised for use with battery-powered angle grinders • High cutting speed Machine suitability: The XT15 ACCU cutting disc is suitable for freehand use with all angle grinders in any performance class (including battery-powered and low-power machines). Material suitability: The XT15 ACCU has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT15 ACCU gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT15 ACCU offers impressive performance even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, and plastic-coated sheet metal. Dimensions: The extra-thin cutting disc has a disc width of 1.0 mm, and is available in the diameters of 115 mm and 125 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Extra-thin cutting disc with special fillers to prevent disc clogging. Also ideal for low-power machines. • Little bur formation • High cutting speed Machine suitability: The XT24 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT24 is specially designed for use on aluminium and other non-ferrous metals such as copper, brass, bronze, etc. as well as steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steel. Structure and production: The cutting disc uses a high-quality formulation of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT24 offers impressive performance in solid material combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT24 offers users an optimum price/performance ratio. This quality tool from RHODIUS is especially suitable for cutting thin-walled metal sheets, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This is the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and container construction, vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Extra-thin cutting disc with ceramic abrasive grain. For aggressive and long-lasting cutting performance. • Minimal burr formation and fewer sparks • High cutting speed • For especially hard and cold steels Machine suitability: The XT200 cutting disc is suitable for freehand use on angle grinders. Material suitability: The XT200 has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT200, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT200 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT200 EXTENDED offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work.