Search

Cuts tiles to leave a clean cutting edge. Good cutting performance on titanium. Also ideal for low-power machines. • Little edge chipping • High cutting speed • Low-dust cut Machine suitability: The XT66 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT66 is especially suitable for use on cast steel and concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium and cast iron (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality SIC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT66 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT66 offers impressive performance based on a very aggressive cut. High-precision processing of thin-walled material is easily achieved. A key characteristic of this disc is its extremely low level of vibration. This cutting disc makes the job easier and is particularly economical. This high-quality RHODIUS tool is an excellent choice for cutting premium tile materials and for other jobs where edge chipping needs to be kept to a minimum. Dimensions: The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This disc is the perfect tool for working on the wide range of applications and challenges in tiling, plumbing and general renovation, as well as landscaping work.

High-performance cutting disc for use with petrol-driven and electrical cutting machines. • High cutting speed • Cool cut • Easy cutting Machine suitability: While suitable for freehand use with a petrol cut-off saw, the FT40 cutting disc can also be used with stationary machines. Material suitability: The FT40 has been specially designed for use on concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium. Structure and production: The cutting disc includes premium silicon carbide (SiC) and 2 (400 mm: 3) full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the FT40, users get a tool that easily meets the demanding quality requirements in manufacturing and the skilled trades. Applications: The FT40 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This cutting disc is the ideal choice for cutting frost-proof tiles. Dimensions: With a disc width of 3.0 mm and 4.0 mm, this freehand cutting disc is available in the diameters of 300 mm and 350 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction.

Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FT24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT24 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FT24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 125 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.

Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FTK24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FTK24 has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: With the FTK24, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FTK24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. • High cutting speed • Cool cut • Easy cutting Machine suitability: The FT44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FT44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FT44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimensions: With a disc width of 2.5 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. • High cutting speed • Cool cut • Easy cutting Machine suitability: The FTK44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FTK44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: The FTK44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FTK44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimensions: With a disc width of 2.0 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Carbide burr, shape A (ZYA): cylinder without end cut. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF A tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF A provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape A (cylinder without end cut) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Non-woven continuous-feed belt for hand-guided belt grinders. • X-Flex, very flexible • No delamination • Uniform surface finish Machine suitability: The RHODIUS ESB V abrasive belt is a flexible continuous-feed non-woven belt designed for use with a handheld belt grinder or tube belt grinder. Material suitability: This product has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results on any of the materials listed here. Structure and production: The backing type used here is an X-flex cloth with fine non-woven nylon fibres. The belt is coated with high-quality aluminium oxide. Quality: The ESB V gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS abrasive belts from the premium TOP line are recommended. Applications: The high-quality non-woven belts from RHODIUS are especially well-suited to edge grinding. These products are the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. When used on a tube belt grinder, these belts adjust to create an optimal fit to the shape of the workpiece. This is a key advantage if the task involves processing round workpieces. Dimensions: The ESB V non-woven belt for handheld belt grinders is available in many variants, and in widths from 9 mm to 40 mm as well as in lengths of 533 mm and 760 mm. To ensure an optimum working result and surface finish at all times, the user can select from several non-woven types: coarse, medium and very fine. Industries: A RHODIUS abrasive belt is the perfect tool for the many applications and challenges faced in machine or metalwork shops, as well as for tasks in plant, container and tank construction, and in pipeline construction.

Polishing paste for finishing surfaces up to a mirror finish. For matching discs, see page 100. • White: Pre-polishing for stainless steel and steel • Brown: Pre-polishing for non-ferrous metals • Blue: High-gloss polishing work on all materials Structure and production: The RHODIUS polishing pastes contain a high-quality abrasive grain, and are perfectly matched to the RHODIUS felt polishing flap discs and cloth rings. A variety of pastes are required, however, according to the material and processing step. White polishing paste: for pre-polishing stainless steel and steel. Brown polishing paste: for pre-polishing non-ferrous metals. Blue polishing paste: for high-gloss polishing and all materials. Quality: The white, blue and brown polishing pastes from RHODIUS provide users with the best materials in their categories. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: RHODIUS polishing pastes enable users to achieve an outstanding surface finish. Each polishing paste is best applied to the cloth ring while the machine is running. Industries: RHODIUS polishing pastes are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Carbide burr, shape B (ZYAS): cylinder with end cut. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF B tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF B provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape B (cylinder with end cut) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.