Search

A high-performance zircon flap disc for the cost-conscious professional. • Good lifetime • High stock removal performance • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability: The RHODIUS LSZ F2 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F2 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: The flap disc is available in diameters from 100 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.

Enables cutting and grinding in one step – with a disc thickness of 1.9 mm. • Extra-thin cutting and grinding with a single disc • Suitable for a variety of materials • Three full-face fabric layers for extra safety Machine suitability: The XTK69 MULTI CROSS combination disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK69 MULTI CROSS has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The combination disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27). Quality: The XTK69 MULTI CROSS gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The disc is approved for both cutting and grinding work. The XT69 MULTI CROSS offers impressive performance with an aggressive cut. A key characteristic of this disc is its extremely low level of vibration. The XTK69 MULTI CROSS makes work easier. This quality RHODIUS tool is an especially good choice for cutting structural steel, sections and beams. Dimensions: This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Versatile cutting disc that offers a good price-performance ratio. • High cutting speed • Comfortable cutting behaviour • Easy cutting Machine suitability: The FT33 X-LOCK cutting disc is suitable for freehand use on angle grinders. Material suitability: The FT33 X-LOCK has been especially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT33 X-LOCK gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FT33 X-LOCK offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimensions: The X-LOCK freehand cutting disc has a disc width of 2.5 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries: This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, in foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Thanks to the unique combination of two important product properties, the VSK VISION delivers major advantages for the surface finishing of stainless steel.It combines an alternating abrasive cloth and non-woven abrasive on one disc. This makes decorative surface finishing (non-woven abrasive) possible with simultaneous material abrasion (abrasive cloth) – saving the operator an entire process step. Optimum revolutions: 3,000–3,500 rpm • Grinding and finishing in one operation • Fine surface finish Machine suitability: The combination flap disc (coated abrasive and non-woven material) with cut-outs is suitable for use on angle grinders from any performance class. Users are recommended to drop speeds to 3–4,000 rpm when using this product. This helps to maximise the tool life. Material suitability: The RHODIUS VSK F was specifically developed for processing stainless steel (e.g. V2A, 1.4301). Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VSK F flap disc offers a powerful combination of abrasive cloth and non-woven abrasive. The abrasive grain used in this product is high-quality zirconium. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VSK F provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimensions: The VSK F flap disc (coated abrasive and non-woven material) is available in the diameters of 115 mm and 125 mm. The grits used are A80 for the abrasive cloth and medium for the non-woven abrasive.

Ceramic grain flap wheel with 6 mm shank. • Best stock removal performance thanks to the high-performance abrasive grain • Large synthetic resin core for a long lifetime • Flexible X-cloth offers good adjustment to the workpiece Machine suitability: The RHODIUS FS K flap wheel is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm shank spindle. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the RHODIUS FS K when working on cast iron, paint and filler. Structure and production: This flap wheel achieves maximum stock removal performance with its self-sharpening ceramic grain. A large synthetic resin core also ensures a long product lifetime. Thanks to its flexible X-cloth, the flap wheel also adapts especially well to the workpiece. Quality: The FS K flap wheel provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This quality product is the tool of choice when users need to tackle fine deburring work and preparatory work on especially hard-to-reach places, or when precise and effective polishing is required on corners or rounded workpieces. For these use cases, the flexible flaps ensure optimum adjustment to the workpiece surface. The product also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimensions: This flap wheel for straight grinders or for flexible shaft drive machines is available in the diameters of 40 mm and 60 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits of 60, 80 and 120. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Attractively priced flap disc with zirconium and polyamide backing. • Good stock removal performance • Proven quality with cotton backing • Good tool life • More comfortable grinding thanks vibration-damping polyamide backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability: The RHODIUS LGZ P3 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The disc is manufactured and safety-tested to EN 13743, and is oSa-certified. The backing pad is made from polyamide. This enables very gentle grinding work. The LGZ P3 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK70 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK70 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines are recommended. Applications: During use, the XTK70 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 150 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ceramic grain flap disc. Thanks to its three cut-outs, the VISION SPEED is transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view of the workpiece • High-performance ceramic grain for rapid grinding without excessive force • Cool cut thanks to binder with active grinding additives Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION SPEED flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the VISION SPEED is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 12° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: With the VISION SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION SPEED offers users impressively high stock removal performance. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120. Notice: RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.

Versatile rough grinding disc. Thanks to the high stock removal performance the RS2 grinds efficiently and with good service life. • Especially good for working on hard materials • High stock removal performance • Long lifetime Machine suitability: <p>The RHODIUS RS2 X-LOCK is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class.</p> Material suitability: <p>The RHODIUS RS2 X-LOCK has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS2 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work.</p> Structure and production: <p>The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations.</p> Quality: <p>The RS2X X-LOCK gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended.</p> Applications: <p>The RS2 X-LOCK offers users an impressively long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum (this applies only to the variants with disc widths of 6 to 10 mm).</p> Dimensions: <p>The RS2 X-LOCK grinding disc is available in disc widths ranging from 4.0 mm to 10.0 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.</p> Industries: <p>This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.</p>

KSN V was developed with the requirements of the automotive industry in mind. The high tear strength and open structure of the mesh ensures optimum dust extraction performance, which in turn offers two decisive advantages: minimal clogging and a long lifetime. Combined with the high-quality aluminium oxide used, these advantages increase performance exponentially. Last but not least, the open mesh structure means that it can be used on any backing pad, regardless of the hole system used. • Optimum dust extraction results in a much longer lifetime • High tear strength and minimal clogging leads to improved stock removal • Open mesh structure means no dependence on hole system Machine suitability: <p>With its open mesh structure, the RHODIUS KSN V self fastening disc is suitable for use on a wide range of popular industry rotary sanders. Effective extraction units should be used, however, to ensure the best working results and a long tool lifetime.</p> Material suitability: <p>This product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users can even achieve very good results on wood with the RHODIUS KSN V.</p> Structure and production: <p>The abrasive grain used here is high-quality, high-performance aluminium oxide. The high tear strength and open structure of the mesh also ensures that good dust extraction can be achieved. The end result is minimal clogging and a long lifetime as well as a working environment with low levels of dust pollution. Thanks to its open mesh structure, the RHODIUS KSN V self fastening disc can be used on a wide range of popular rotary sanders, regardless of the specific hole system used.</p> Quality: <p>The KSN V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>The KSN V is an excellent choice for grinding of coatings and sanding off surface impurities.<br>This tool also makes short work of grinding off uneven areas on the edges of the surface to be repaired. This self fastening disc is also the tool of choice for smoothing off filler and primer coats or fine grinding work on primer filler.</p> Dimensions: <p>This self fastening disc is available in the diameters of 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 400.</p> Industries: <p>The RHODIUS self fastening disc was developed with the requirements of the automotive industry in mind. This product is the perfect tool for the many applications and challenges faced in car repair shops, vehicle construction, plant and tank construction, metalwork shops and in general installation work.</p>