Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. • Strong material abrasion with simultaneous surface finish • Long lifetime through high-density fill • Open structure, thus less clogging Machine suitability: The RHODIUS VWK drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VWK on any of the materials listed here. Structure and production: The product combines abrasive cloth with a non-woven abrasive. This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality: The VWK drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product offers high-performance material abrasion with simultaneous surface finishing. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of FEPA grits: A60, A80 and A150, combined with the non-woven grits of coarse, medium and fine. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.
Stainless steel
Steel
Non-ferrous metals
Non-woven disc drum, for use with satin finishing machines. • Consistent finishing • Long lifetime through high-density fill • Open structure, thus less clogging Machine suitability: The RHODIUS VW non-woven abrasive drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VW on any of the materials listed here. Structure and production: This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality: The VW non-woven abrasive drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the perfect tool for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product ensures a consistent, high-quality finish. Dimensions: This non-woven abrasive drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits, including coarse, medium, fine, very fine and ultrafine. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.
Stainless steel
Steel
Non-ferrous metals
Abrasive flap drum, for use with satin finishing machines. • Open design prevents clogging Machine suitability: The RHODIUS LW non-woven disc drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS LW when working on wood. Structure and production: This drum enjoys a very long lifetime thanks to its high-density coating. Quality: The LW non-woven disc drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 120. Industries: These products are the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.
Stainless steel
Steel
Wood
Felt flap drum, for use with satin finishing machines. • High-quality wool felt • High-density fill ensures long lifetime Machine suitability: The FW felt flap drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FW on any of the materials listed here. Structure and production: High-quality wool felt is used for this product. This drum enjoys a very long lifetime thanks to its high-density coating. Quality: The FW felt flap drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Always use this felt flap drum with the RHODIUS polishing paste that is perfectly matched to your working material. This ensures you achieve the best results. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several quality grades (flap thickness (D), felt hardness (H)): D3/H25, D3/H40, D5/H25, D5/H25. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.
Stainless steel
Steel
Non-ferrous metals
Non-woven cleaning tool for the quick change system with ceramic high-performance abrasive grain. • Stable edges • Maximum cleaning performance • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS SVS QUICK HD non-woven quick change cleaning disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the SVS QUICK HD when working on wood, paint and filler. Structure and production: The non-woven cleaning disc for the quick change system utilises self-sharpening high-performance ceramic abrasive grain that provides an impressive level of cleaning performance. At the same time, the SVS QUICK HD has very high edge strength. Quality: With the RHODIUS SVS QUICK HD quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The SVS QUICK HD is available in the diameters of 51 mm and 76 mm, and with an extra coarse grit. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Steel
Stainless steel
Wood
Paints/fillers
Zirconium flap disc for the quick change system, offering maximum stock removal performance combined with a very long lifetime. • Maximum lifetime • Excellent stock removal performance • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS LSZ QUICK quick change mini flap disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS LSZ QUICK on any of the materials listed here. Structure and production: Developed for the quick change system, this zirconia flap disc achieves impressively high stock removal performance while simultaneously offering a very long product lifetime. Quality: With the RHODIUS LSZ QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The LSZ QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 40, 60, 80 and 120. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals
Ceramic grain fibre disc for the quick change system – the grain enables rapid and superior stock removal performance. • Especially suitable for hardened and tempered steels, tinder areas and titanium • Perceivably faster stock removal • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS KFK QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFK QUICK on any of the materials listed here. Structure and production: Developed for the quick change system, this fibre disc utilises self-sharpening high-performance ceramic abrasive grain that provides an impressive level of cleaning performance. The backing type used here is a polyester-based X-weight cloth. Quality: With the RHODIUS KFK QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for high-precision grinding work, and especially where this involves very small spaces or hard-to-reach areas. This product is especially well-suited to processing quenched steel, tinder areas and titanium. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The KFK QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 36, 60, 80 and 120. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals
Zirconium fibre disc for the quick change system – the grain enables excellent stock removal performance on steel and stainless steel. • Excellent stock removal • Grinding active filler material for cool, rapid grinding • Rapid tool changeover without sticking or slippage Machine suitability: A backing pad is required when using the RHODIUS KFZ QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFZ QUICK on any of the materials listed here. Structure and production: Developed for the quick change system, this fibre disc utilises zirconium as an abrasive grain to provide very good stock removal performance. The special active grinding fillers also help to keep grinding cool and quick, so as to reduce the thermal stresses affecting the workpiece. The backing type used here is a polyester-based Y-weight cloth. Quality: With the RHODIUS KFZ QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for high-precision grinding work on steel and stainless steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The KFZ QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 36, 40, 60, 80 and 120. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals
Aluminium oxide fibre disc for the quick change system – the grain enables excellent stock removal performance on steel. • Good stock removal • Long lifetime • Rapid tool changeover without sticking or slippage Machine suitability: A backing pad is required when using the RHODIUS KFS QUICK quick change fibre disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). Material suitability: The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KFS QUICK on any of the materials listed here. Structure and production: Developed for the quick change system, this fibre disc uses aluminium oxide as an abrasive grain and achieves good stock removal performance while simultaneously offering a long product lifetime. The backing type used here is a polyester-based X-weight cloth. Quality: The RHODIUS KFS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Applications: This tool is an excellent choice for high-precision grinding work on steel, and especially where this involves very small spaces or hard-to-reach areas. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The KFS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from various grits, ranging from 24 to 120. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools makes work easier by offering first-class performance on steel and non-ferrous metals.
Steel
Non-ferrous metals
Unitised disc for use with the quick change system. For burr removing, blending and finishing. • Decorative surface finish • Long lifetime • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS VKS QUICK quick change mini unitised disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKS QUICK on any of the materials listed here. Structure and production: This unitised disc for the quick change system is especially well-suited to deburring and blending work, and for ensuring an especially clean finish. The unitised disc also features an impressively long product lifetime. Quality: With the RHODIUS VKS QUICK quick change disc, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that require a decorative surface finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The VKS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select a grit variant: either 3S (fine) or 6A (medium). Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals