The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry cutting. • 12 mm high segments • Wide range of applications • High cutting speed • Wet and dry cut • Laser-welded Machine suitability: The LD40 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The LD40 X-LOCK has been specifically designed for working on concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing granite, hard concrete with aggregates, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD40 X-LOCK features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD40 X-LOCK a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Concrete
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Machine suitability: The DG15 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG15 X-LOCK has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and production: The DG15 X-LOCK features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 X-LOCK a particularly powerful tool. The disc is sintered directly. Quality: With the DG15 X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 X-LOCK has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 X-LOCK features a turbo rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 X-LOCK a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Tiles/ceramics
The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high segments allow fast working and clean cutting edges. Suitable for wet and dry cutting. • 10 mm segment height for a very good lifetime • Short cutting times • Continuous turbo rim enables high cutting speed and clean cutting edges • Usable on a wide range of materials from granite to concrete • Wet and dry cutting Machine suitability: The DG35 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG35 X-LOCK has been specifically developed for processing granite. This RHODIUS quality tool is also an excellent choice when processing hard concrete with aggregates, clay tubes, paving stones, clay roofing tiles, concrete and paving bricks, hard stone and flagstones, concrete roofing tiles and hollow stone blocks. Structure and production: The DG35 X-LOCK features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG35 X-LOCK a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Natural stone
Versatile rough grinding disc. Thanks to the high stock removal performance the RS2 grinds efficiently and with good service life. • Especially good for working on hard materials • High stock removal performance • Long lifetime Machine suitability: <p>The RHODIUS RS2 X-LOCK is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class.</p> Material suitability: <p>The RHODIUS RS2 X-LOCK has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS2 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work.</p> Structure and production: <p>The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations.</p> Quality: <p>The RS2X X-LOCK gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended.</p> Applications: <p>The RS2 X-LOCK offers users an impressively long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum (this applies only to the variants with disc widths of 6 to 10 mm).</p> Dimensions: <p>The RS2 X-LOCK grinding disc is available in disc widths ranging from 4.0 mm to 10.0 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.</p> Industries: <p>This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.</p>
Steel
Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. • Long lifetime • Quick stock removal • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LSZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The LSZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimensions: The flap disc is available in diameters from 115 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 24, 40, 60, 80 and 120. Notice: RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.
Stainless steel
Steel
The RH403S offers quick and easy chasing of slots and ducts in materials such as masonry. Built-in electronics include a soft starter, a temperature and overload cut-out, as well as an overload indicator. Last but not least, the machine also features a slim design. For the wall chasing machine, RHODIUS offers the two diamond cutting discs LD403S with a width of 18 mm and LD404 with a width of 28.5 mm, with diameters of 125 mm and 150 mm. Thanks to the ALL IN ONE system with its staggered segments, made-to-measure wall slots can be created. Minimal hood clearance means the machine can perform edgeless work up to 18 mm when chasing with diamond discs. The cutting depth can be set to any value from 12 to 45 mm simply by adjusting the safety hood – which is quick, simple and needs no tools. Thanks to the split safety spindle with matching spacers, operators can easily swap out the tool to ensure that setup time is kept to a minimum. The ALL IN ONE can be used only with the split spindle. The chasing machine also features a flexible safety cable. The ejector with a diameter of 35 mm is intended for direct connection to a class M industrial vacuum cleaner. The ergonomic handle with a two-stage start switch and the machine’s push-to-cut action both help to ensure comfortable and precise working. Min. performance requirement of the machine: Ø 125mm - 1,800 W/ Ø 150 mm - 2,200 W Not suitable for use on angle grinders. • Perfectly matched to the ALL IN ONE • Foldable hood makes initial cut and milling slots virtually dust-free • Powerful 2,300 W high-torque motor • Electronics – soft start, thermal/overload cut-off, overload indicator • Suction hose lock prevents unintentional disconnection of the hose during milling work • Tool-free and user-friendly adjustment of milling depth, from 12 to 45 mm • Spindle lock for easy tool change • Slim design • Low clearance between hood and diamond discs allows for working up to 18 mm from the edge • Closed hood for optimum flow conditions • Push-to-cut ensures convenient handling • Extraction nozzle Ø 35 mm for direct connection of a Class M industrial extraction unit • Spacer rings for individual disc use and special brick chisel available in the add-on kit Machine suitability: <p>The RHODIUS RH403S wall chaser is perfectly designed to complement the RHODIUS ALL IN ONE diamond cutting discs. The scope of delivery includes: 1x RH403S wall chaser, 1x LD404 ALL IN ONE diamond cutting disc (for 20 and 25 mm ductwork), 2x 11 mm spacers for the LD404, 2x 17 mm spacers for the LD402 and 1x sturdy metal equipment case. Spacer rings for individual disc use and a special brick chisel are available as an expansion set.</p> Material suitability: <p>The combination of the RHODIUS RH403S and RHODIUS ALL IN ONE offers a straightforward approach to wall slot chasing<br>in just one work step. This really shows its strengths when used on aerated concrete, pumice, concrete<br>and fireclay, letting users work extremely quickly.</p> Structure and production: <p>The wall chaser is equipped with a powerful motor offering 2,300 W of tractive power, all encased in a very streamlined housing. Thanks to the split safety spindle and perfectly matched spacer rings, operators can swap out the diamond discs quickly and easily. Setup time is reduced to a minimum. The RHODIUS RH403S features a soft starter, a temperature and overload cut-out, as well as an overload indicator. A class M industrial vacuum cleaner can also be connected directly to the RH403S. The hose lock prevents unintentional disconnection of the extraction hose during chasing work.</p> Quality: <p>The RH403S wall chaser provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>The RH403S offers quick and easy chasing of grooves and ducts in masonry. No problematic knocking out of the middle ridge is needed. The combination of the RHODIUS RH403S wall chaser and the ALL IN ONE diamond disc system completes both steps simultaneously thanks to its unique design of diamond segments arranged in a crisscross formation. The material is transported to the outside. This principle of operation also prevents rapid clogging of the disc. The end result is a precisely chased wall slot with very little rework required. Material is removed quickly, cleanly and with virtually nothing left over. Operators using the RH403S plus the ALL IN ONE will complete their wall chasing jobs in almost half the time.</p> Dimensions: <p>The RHODIUS RH403S wall chaser is compatible with the RHODIUS LD402 diamond cutting discs with a width of 18 mm and the RHODIUS LD404 discs with a width of 28.5 mm. Users can select from a diameter of 125 mm or 150 mm. The minimal gap between the protective cover and the diamond cutting disc lets operators work as close as 18 mm<br>to the edge. The chasing depth can be adjusted easily, continuously and without tools from 12 mm to 45 mm.</p> Industries: <p>The RHODIUS RH403S wall chaser is the perfect tool for the day-to-day challenges faced in the construction and plumbing trades, in interior fit-out and renovations. The tool makes work easier, more precise and considerably faster.</p>
Quick and aggressive grinding with very high stock removal performance, thanks to a large contact surface and extra-long flaps. • Ceramic grain offers high stock removal performance • Especially suitable for hardened and tempered steel, tinder areas and titanium • Particularly good for edge grinding Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Users should match the disc to a high-power drive to get the best-possible level of performance. Material suitability: The RHODIUS JUMBO SPEED EXTENDED flap disc has been specifically developed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the JUMBO SPEED EXTENDED is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The JUMBO SPEED EXTENDED gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The JUMBO SPEED EXTENDED offers an impressively long tool life plus highly aggressive stock removal and a very long lifetime. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. During use, the JUMBO SPEED EXTENDED flap disc offers superior performance with its long, overlapping flaps. These noticeably take performance up a notch and ensure aggressive stock removal. Dimensions: This flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the disc variant, in the FEPA grit sizes of 40, 60 and 80. This flap disc is also available in the diameters 150 mm and 180 mm with a FEPA grit of 40. Notice: RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.
Stainless steel
Steel
Ceramic grain flap disc. Thanks to its three cut-outs, the VISION SPEED is transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view of the workpiece • High-performance ceramic grain for rapid grinding without excessive force • Cool cut thanks to binder with active grinding additives Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION SPEED flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the VISION SPEED is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 12° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: With the VISION SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION SPEED offers users impressively high stock removal performance. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120. Notice: RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.
Stainless steel
Steel
Non-ferrous metals