Search

At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Precise cut through 0.8 mm disc width • Little burr formation Machine suitability: The XT8 EXACT MINI cutting disc is suitable for freehand work on mini angle grinders and straight grinders, as well as on machines with a flexible shaft drive in any performance class (with ASB XT mandrel). Material suitability: The XT8 EXACT MINI has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT8 EXACT MINI gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT8 EXACT MINI offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation, smooth, vibration-free operation and very low level of burr formation. This disc also minimises tarnish colouring on the material. All of which makes work easier and is especially cost-effective. The disc is an ideal choice for cutting work on hard-to-reach locations. This high-quality RHODIUS tool is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimensions: With a disc width of 0.8 mm, the extra-thin cutting disc is available in diameters from 30 mm to 65 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Carbide burr, shape A (ZYA): cylinder without end cut. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF A tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF A provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape A (cylinder without end cut) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape D (KUD): ball. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF D tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF D provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the double cut variant (Z 6), the user benefits both from highly aggressive stock removal as well as a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape D (ball) according to DIN 8032 is available with head diameters of 3 mm to 12.7 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape E (TRE): oval. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF E tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF E provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. Dimensions: The carbide burr with shape E (oval) according to DIN 8032 is available with head diameters of 9.6 mm to 16 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape F (RBF): ball-nosed tree. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF F tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF F provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape F (ball-nosed tree) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape G (SPG): tree. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF G tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF G provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape G (tree) according to DIN 8032 is available with head diameters of 6 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape H (FLF): flame. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF H tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF H provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. Dimensions: The carbide burr with shape H (flame) according to DIN 8032 is available with head diameters of 6 mm to 16 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape J (KSJ): 60° countersink. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF J tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF J gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. Dimensions: The carbide burr with shape J (60° countersink) according to DIN 8032 is available with head diameters of 9.6 mm to 16 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape K (KSK): 90° countersink. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF K tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF K provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This carbide burr in the double cut variant (Z 6) with chip breaker provides highly aggressive stock removal as well as a long tool life and concentricity. A very high surface treatment quality is also achieved. Dimensions: The carbide burr with shape K (90° countersink) according to DIN 8032 is available with a head diameter of 16 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape L (KEL): ball-nosed cone. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF L tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF L provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape L (ball-nosed cone) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.