Search

The CD30 tile drill bit has been designed especially for use on angle grinders with an M14 thread. On smaller diameters, the internal wax layer ensures a cool cut, even at high cutting speeds. This minimises any risk of splintering on the edge of the drill hole. The CD30 also offers users an impressively long tool life. • Cool cut through internal cooling wax • Excellent service life • High cutting speed Machine suitability: The CD30 tile drill has been designed for use on angle grinders with an M14 thread. This product can be used to the full on machines from any performance class. Material suitability: The CD30 has been specifically developed for processing glazed tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite as well as high-fired tiles. Structure and production: The internal wax layer ensures a cool cut at high cutting speeds. For small diameters in particular, this is a decisive advantage. This minimises the risk of the edge of the drill hole splintering. The RHODIUS CD30 tile drill also offers users an impressively long tool life. The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the CD30 a particularly powerful tool. The tile drill has also been laser-welded. Dimensions: This tile drill is available in diameters from 6 mm to 65 mm.

The DS1 is equipped with forged turbo segments, enabling maximum stock removal and extending the lifetime at the same time – a key advantage when processing concrete products. The user saves time, especially when levelling formwork joints. • Maximum stock removal • Ideal for levelling formwork joints • Forged turbo segments for rapid, aggressive stock removal and a long lifetime Machine suitability: The DS1 diamond cup wheel is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DS1 has been specifically designed for processing hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone and flagstones. This high-quality RHODIUS tool is also an excellent choice for processing stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The tool has been tested to EN 13236 and oSa. The use of a very high concentration of high-quality industrial diamonds makes the DS1 a particularly powerful tool. The diamond cup wheel is also laser welded. Quality: With the DS1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cup wheel is available in diameters from 115 mm to 180 mm.

With high stock removal and notably good dust removal, the DS2 is especially convincing – particularly when used with Hilti machines. The segments on the DS2 are aligned in a vortex-like pattern to ensure maximum stock removal. • High stock removal performance • Good dust removal • Segments aligned in vortex-like pattern for maximum stock removal • Special adapter for Hilti machines Machine suitability: The DS2 diamond cup wheel is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DS2 has been specifically designed for processing hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone and flagstones. This high-quality RHODIUS tool is also an excellent choice for processing stone blocks. Structure and production: The tool has been tested to EN 13236 and oSa. The use of a very high concentration of high-quality industrial diamonds makes the DS2 a particularly powerful tool. The diamond cup wheel is also laser welded. Quality: With the DS2, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cup wheel is available with a diameter of 150 mm.

The high diamond concentration of the DS10 enables trouble-free, aggressive grinding over a long period. • High concentration of diamonds • Long lifetime • Aggressive grinding Machine suitability: The DS10 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DS10 has been specifically designed for processing hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, sandstone, hollow stone blocks and green concrete. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks, hard precast concrete blocks and stone blocks. Structure and production: The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS10 a particularly powerful tool. The diamond cup wheel is also laser welded. Dimensions: This diamond cup wheel is available in diameters from 100 mm to 180 mm.

The DS40 is a very good choice for the cost-conscious professional. The DS40 achieves high stock removal and makes work easier thanks to efficient dust removal. • Good dust removal • Good stock removal • Good price-performance ratio Machine suitability: The DS40 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DS40 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard and medium-hard masonry bricks. Structure and production: The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS40 a particularly powerful tool. The cup wheel is also laser welded. Dimensions: This cup wheel is available in the diameters of 100 mm and 125 mm.

Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume cutting. • Cutting disc with ceramic abrasive grain • High cutting speed • Little burr formation Machine suitability: The XT100 cutting disc is suitable for freehand use on angle grinders. Material suitability: The XT100 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT100, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT100 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, especially light and fast cut. The disc features minimal sparking, low dust generation and vibration-free operation that offers exceptional stability. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This product offers an ideal price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Cuts tiles to leave a clean cutting edge. Good cutting performance on titanium. Also ideal for low-power machines. • Little edge chipping • High cutting speed • Low-dust cut Machine suitability: The XT66 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT66 is especially suitable for use on cast steel and concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium and cast iron (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality SIC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT66 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT66 offers impressive performance based on a very aggressive cut. High-precision processing of thin-walled material is easily achieved. A key characteristic of this disc is its extremely low level of vibration. This cutting disc makes the job easier and is particularly economical. This high-quality RHODIUS tool is an excellent choice for cutting premium tile materials and for other jobs where edge chipping needs to be kept to a minimum. Dimensions: The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This disc is the perfect tool for working on the wide range of applications and challenges in tiling, plumbing and general renovation, as well as landscaping work.

High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FT38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT38 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FT38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FTK38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FTK38 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: With the FTK38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FTK38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. • Long service life • Comfortable cutting behaviour • Easy cutting Machine suitability: For freehand use, the FT26 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT26 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium silicon carbide (SiC) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The FT26 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, supports, sections and panels. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.