The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. This enables extremely short cutting times and very clean cutting edges. At the same time, dust generation during dry cutting has been further reduced with the DG10. • Low dust generation • Continuous turbo rim enables high cutting speed • Narrow cut width for exact cuts and clean cutting edges • Usable for a wide range of materials • Developed for dry cutting Machine suitability: The DG10 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG10 has been specifically developed for processing porcelain and ceramics as well as porcelain/glazed tiles. This high-quality RHODIUS tool is also an excellent choice for processing granite, high-fired tiles and marble. Structure and production: The DG10 features a segmented turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG10 a particularly powerful tool. The disc is sintered directly. Quality: With the DG10, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 350 mm.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 105 mm to 250 mm.
Tiles/ceramics
With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with the forged segments. In addition, the steel core has cooling openings. It is particularly suited for angle grinders, table saws and petrol-driven cut-off saws. Laser-welded. Suitable for wet and dry cutting. • Extra-long lifetime due to forged segments with a height of up to 17 mm • For angle grinders, petrol-driven cut-off saws and table saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and production: The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.
Natural stone
The LD45 is specifically developed for use on table saws and petrol cut-off saws. Due to its high cutting speed and long lifetime, it offers impressive performance on materials ranging from hard concrete with aggregates to soft concrete blocks. The forged segments reduce the vibrations to a minimum. Suitable for wet and dry cutting. • High cutting speed • Long lifetime • Specifically for table saws and petrol cut-off saws • Wet and dry cutting • Laser-welded Machine suitability: The LD45 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for petrol cut-off saws and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD45 has been specifically designed for working on hard concrete with aggregates, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD45 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD45 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 300 mm to 400 mm.
Concrete
The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height for an even longer lifetime • High-performance cutting disc suitable for many kinds of applications • Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles • Wet and dry cut • Laser-welded Machine suitability: The LD300 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD300 X-LOCK has been specifically designed for working on hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble tiles, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone, hollow stone blocks, asphalt, green concrete and soft precast concrete blocks. This high-quality RHODIUS tool is also an excellent choice for processing paving stones, slate and concrete roofing tiles. Structure and production: The LD300 X-LOCK features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD300 X-LOCK a particularly powerful tool. The disc is also laser welded. Quality: With the LD300 X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Concrete
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 X-LOCK has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 X-LOCK features a turbo rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 X-LOCK a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Tiles/ceramics
The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height for an even longer lifetime • High-performance cutting disc suitable for many kinds of applications • Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles • Wet and dry cut • Laser-welded Machine suitability: The LD300 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD300 has been specifically designed for working on hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble tiles, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone, hollow stone blocks, asphalt, green concrete and soft precast concrete blocks. This high-quality RHODIUS tool is also an excellent choice for processing paving stones, slate and concrete roofing tiles. Structure and production: The LD300 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD300 a particularly powerful tool. The disc is also laser welded. Quality: With the LD300, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: <p>This diamond cutting disc is available in diameters from 115 mm to 500 mm.</p>
Concrete