The CD30 tile drill bit has been designed especially for use on angle grinders with an M14 thread. On smaller diameters, the internal wax layer ensures a cool cut, even at high cutting speeds. This minimises any risk of splintering on the edge of the drill hole. The CD30 also offers users an impressively long tool life. • Cool cut through internal cooling wax • Excellent service life • High cutting speed Machine suitability: The CD30 tile drill has been designed for use on angle grinders with an M14 thread. This product can be used to the full on machines from any performance class. Material suitability: The CD30 has been specifically developed for processing glazed tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite as well as high-fired tiles. Structure and production: The internal wax layer ensures a cool cut at high cutting speeds. For small diameters in particular, this is a decisive advantage. This minimises the risk of the edge of the drill hole splintering. The RHODIUS CD30 tile drill also offers users an impressively long tool life. The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the CD30 a particularly powerful tool. The tile drill has also been laser-welded. Dimensions: This tile drill is available in diameters from 6 mm to 65 mm.
Tiles/ceramics
The CD40 tile drill bit has been designed especially for use on handheld drills with a 1/4" bit adapter. On smaller diameters, the internal wax layer ensures a cool cut, even at high cutting speeds. This minimises any risk of splintering on the edge of the drill hole. The CD40 also offers users an impressively long tool life. • Cool cut through internal cooling wax • Excellent service life • High cutting speed Machine suitability: <p>The CD 40 tile drill bit has been designed for use on handheld drills with a 1/4” bit adapter. This product can be used to the full on machines from any performance class.</p> Material suitability: The CD40 has been specifically developed for processing glazed tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite as well as high-fired tiles. Structure and production: The internal wax layer ensures a cool cut at high cutting speeds. For small diameters in particular, this is a decisive advantage. This minimises the risk of the edge of the drill hole splintering. The RHODIUS CD40 tile drill also offers users an impressively long tool life. The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the CD40 a particularly powerful tool. The tile drill has also been laser-welded. Dimensions: This tile drill is available in the dimensions of 6x hexagonal to 14x hexagonal.
Tiles/ceramics
The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. This enables extremely short cutting times and very clean cutting edges. At the same time, dust generation during dry cutting has been further reduced with the DG10. • Low dust generation • Continuous turbo rim enables high cutting speed • Narrow cut width for exact cuts and clean cutting edges • Usable for a wide range of materials • Developed for dry cutting Machine suitability: The DG10 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG10 has been specifically developed for processing porcelain and ceramics as well as porcelain/glazed tiles. This high-quality RHODIUS tool is also an excellent choice for processing granite, high-fired tiles and marble. Structure and production: The DG10 features a segmented turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG10 a particularly powerful tool. The disc is sintered directly. Quality: With the DG10, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 350 mm.
Tiles/ceramics
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Machine suitability: The DG15 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG15 has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and production: The DG15 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 a particularly powerful tool. The disc is sintered directly. Quality: With the DG15, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.
Tiles/ceramics
The LD1 ensures a cool, fast and particularly precise cut – with a smooth continuous rim and clean cutting edge. At the same time, dust generation during dry cutting is reduced to a minimum. Suitable for wet and dry cutting. • Low dust generation • Extra-thin cutting disc for a high cutting speed and precise cuts • Smooth continuous rim for a clean cutting edge • Wet and dry cutting Machine suitability: The LD1 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD1 has been specifically developed for processing porcelain and ceramics as well as porcelain tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite, glazed tiles and high-fired tiles. Structure and production: The LD1 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD1 a particularly powerful tool. The disc is also laser welded. Quality: With the LD1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
With its smooth continuous rim, the DG45 enables short cutting times, particularly smooth cutting and very clean cutting edges. The DG45 was specifically developed for dry cutting applications and shows its full potential in this area with its 10 mm high segments. • 10 mm high segments • Short cutting times • Smooth continuous rim for a clean cutting edge • Specifically developed for dry cutting Machine suitability: The DG45 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG45 has been specifically designed for working on granite, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. Structure and production: The DG45 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG45 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.
Tiles/ceramics
The DG25 is a electroplated special cutting disc and optimised for marble. It achieves short cutting times and a long lifetime. The DG25 makes very precise work much easier. Optimal free cut results in clean cutting edges. Suitable for wet and dry cutting. • Short cutting time • Long lifetime • Electroplated special cutting disc • Diamond bond optimised for marble • Precise cuts and clean cutting edges • Optimal free cut • Wet and dry cutting Machine suitability: The DG25 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG25 has been specifically developed for processing marble. This high-quality RHODIUS tool is also an excellent choice for processing glazed tiles. Structure and production: The DG25 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG25 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 105 mm to 250 mm.
Tiles/ceramics
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Machine suitability: The DG15 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG15 X-LOCK has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and production: The DG15 X-LOCK features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 X-LOCK a particularly powerful tool. The disc is sintered directly. Quality: With the DG15 X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 X-LOCK has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 X-LOCK features a turbo rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 X-LOCK a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.
Tiles/ceramics