Frequently Asked Questions About the Private Label Process
- DG70 Diamond Cutting Disc – ALPHAline – Stainless Steel
115 and 125 x 10 x 1.6 x 22.23 mm
230 x 10 x 1.6 x 22.23 mm
- LD40 Diamond Cutting Disc – PROline – Stainless Steel
115 and 125 x 12 x 2.2 x 22.23 mm
230 x 12 x 2.4 x 22.23 mm
- Diamond cutting disc DG50 – ALPHAline – Stainless steel
115 and 125 x 7.0 x 1.6 x 22.23 mm
230 x 7.0 x 1.9 x 22.23 mm
- Extra-Thin Cutting Disc XT70 – ALPHAline – Stainless Steel
115 and 125 x 1.0 x 22.23 mm
115 and 125 x 1.5 x 22.23 mm
Extra-thin cutting disc XT38 – PROline – stainless steel
115 and 125 x 1.0 x 22.23 mm
180 x 1.5 x 22.23 mm
230 x 1.9 x 22.23 mm
Extra-thin cutting disc XT10 – TOPline – stainless steel
115 and 125 x 1.0 x 22.23 mm
Extra-thin cutting disc XTK70 – ALPHAline – steel
180 x 1.5 x 22.23 mm
230 x 1.9 x 22.23 mm
FTK33 Freehand Cutting Disc – PROline – steel
115 x 3.0 x 22.23 mm
125 x 3.0 x 22.23 mm
180 x 3.0 x 22.23 mm
230 x 3.0 x 22.23 mm
Grinding Disc KSM – ALPHAline – steel
115 x 7.0 x 22.23 mm
125 x 7.0 x 22.23 mm
180 x 7.0 x 22.23 mm
230 x 7.0 x 22.23 mm
Fan-shaped grinding wheel LSZ F3 – ALPHAline – Stainless Steel
115 and 125 x 22.23 mm; K40, K60, K80
Fan-shaped grinding disc LSZ FB – TOPline – stainless steel
115 and 125 x 22.23 mm; K40, K60, K80
Minimum Order Quantity
Extra-thin cutting discs: min. 2,000 pcs.
Depressed cutting discs: min. 2,000 pcs.
Grinding discs: min. 1,000 pcs.
Fan-shaped grinding discs: min. 500 pcs.
Our products are available in three quality references. This also applies to our private-label products. This means you always get—and pay for—only as much RHODIUS and innovation as you actually need for your product.
TOPline
Products offer professional users maximum product benefits, reliability, and ease of use at an optimal price-performance ratio
PROline
products are designed to meet particularly high quality standards for frequent use in industry and trade. They offer a good price-performance ratio as well as high cost-effectiveness.
ALPHAline
Products are reliable grinding tools with an attractive price-performance ratio for the cost-conscious professional.
The PROline and TOPline product ranges stand out thanks to innovative technologies that enhance the product’s performance and durability:
 | EXTENDED Thanks to a completely new manufacturing process, RHODIUS has succeeded in boosting the performance of the XT10 EXTENDED by 30 per cent. The blade is sharp right from the start. It enables more precise cuts and significantly more cuts than the conventional XT10. It also runs particularly quietly, smoothly and with low-vibration characteristics. |
 | HYDROPROTECT Resin-bonded grinding discs age and lose performance over time, even when not in use. With HydroProtect, RHODIUS has developed a formula that slows down this moisture-induced ageing process and maintains the performance of the grinding discs over the long term. The result is a noticeable benefit – for stock management in specialist retailers and craft businesses. |
In a nutshell: No.
The label you designed is produced using the offset printing process with spot colors. Certain variations in color reproduction are possible.
The type of paper used also affects color reproduction: To ensure the most accurate color representation possible, we use premium white paper. This offers the highest possible color fidelity. However, slight variations can never be completely ruled out.
During the manufacturing process, the label passes through an oven. The label is heat-set. This heat-setting process naturally also affects the colors of the window label—it has a slightly “darkening” effect.
Please be aware, therefore, that color variations may occur.
Clear-View Container
The convenient packing unit for ten extra-thin cutting discs.
XT70 and XT38: 115 and 125 x 1.0 x 22.23 mm
Cardboard box
The classic packaging option. You have the following options:
Extra-thin cutting discs – boxes of 25 and 50
Freehand cutting discs – boxes of 25
Roughing discs – boxes of 25 and 10 (depending on size)
Flap sanding discs – boxes of 10
First, you will receive an order confirmation from us. This will include the estimated delivery date. Depending on our workload and the complexity of the order, please allow approximately 15 to 20 business days for us to deliver the goods to you.
No, you will receive all the products in a single shipment.
Since this is an industrial manufacturing process and production-related variations in quantity may occur, we reserve the right to deliver up to 10% more or less than the ordered quantity.
We sell and ship only within the EU. Our Terms and Conditions apply.
You can use the button below to send a written inquiry to RHODIUS. We will then contact you immediately. If you contact us outside of business hours, we will get back to you as soon as possible.
To make an inquiry by phone, please dial the following number: +49 2636 96910-2400
No – please dial +49 2636 96910-2500