Cutting discs and grinding discs
The RHODIUS product range of cutting discs, grinding discs and flap discs offers the right solution for almost any task or day-to-day challenge faced in building fitting work. Our products are reliable, safe and always provide the level of performance you need. The wide variety of applications, involving machines of varying power and an ever-changing set of materials creates a huge number of possible combinations. This means there is no such thing as the perfect ‘universal abrasive disc’. That is also why our product range is so extensive. We are happy to advise you here about the right product and we offer direct support from our application engineers.
RHODIUS cutting and grinding discs – available anywhere and at any time for building fitters
The continuous availability of RHODIUS grinding tools for building fitters is assured by our extensive dealer network. And if you suddenly find you need more at the site, our retail partners will be more than happy to help you.
Perfect results with cutting discs, grinding discs and flap discs for building fitters
Cutting with stationary chop saws
The most economical option here is to choose cutting discs specially developed for chop saws with diameters of 300 mm or 400 mm.
Fine finishing with the angle grinder
If you spray the flap disc with silicone-free cutting spray, you can even get good results on aluminium, since the spray will prevent rapid clogging.
Keep an eye on everything
Special flap discs with cut-outs ensure perfect control of material abrasion at all times. These discs become transparent when they rotate.
Highlight products for building fitting work
RHODIUS products are safe products
With our specially developed innovative tools, we want to make your day-to-day work that little bit easier. For jobs where the visual appeal of the final workpiece is a decisive quality criterion, we have developed tools such as the VISION series of flap discs, for example.
Anyone on the building site who needs to use a disc that can grind as well as cut is well advised to pick the XTK35 CROSS with a thickness of just 1.9 mm. With its three full-face fabric layers, the disc meets all of the safety requirements set by the EN 12413 standard. Application safety is always the very topmost priority at RHODIUS. Our cutting and grinding tools are produced according to the stringent guidelines issued by the Organisation for the Safety of Abrasives and therefore meet the very highest safety standards. The oSa symbol on the RHODIUS disc is visible proof of this compliance.
