Steel cup brush with crimped steel wire on a 6 mm shank, for use on straight grinders. With high maximum permitted revolutions. • For flexible working • For gentle cleaning • STBWGSK: Moulded in plastic for up to 10 times longer lifetime Machine suitability: The STBWGSK technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the STBWGSK is high-quality plastic-bonded and crimped steel wire. This plastic bond means the wire cannot simply break off. Instead, the wire tips wear down gradually over time. The end result is a brush that lasts up to ten times longer. Quality: The STBWGSK provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the STBWGSK is 0.30 mm. This cup brush is available with a diameter of 50 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Steel
Carbide burr set, consisting of the three/five most popular carbide burr shapes. • Double cut for high material abrasion • Attractive plastic box for easy storage Machine suitability: <p>The tungsten carbide burrs can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels.</p> Structure and production: <p>The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. The double cut variant ensures very high material abrasion.The tungsten carbide burrs can be stowed away safely in the handy plastic box.</p> Quality: <p>The HF SET provides users with the best RHODIUS tools in their category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>The tungsten carbide burrs offer an impressive level of concentricity. These tools can be guided easily even for less aggressive stock removal work. High-precision milling is easy for users to achieve. Thanks to their very sturdy tooth design, the burrs also offer users a long tool life.</p> Dimensions: <p>This set of tungsten carbide burrs includes the three/five most popular carbide burr shapes:ball-nosed cylinder, ball and ball-nosed tree or cylinder without end cut, ball-nosed cylinder, ball, ball-nosed tree, tree. The head diameter is 9.7 mm in each case.</p>
Stainless steel
Steel
Cast iron
Carbide burr, shape B (ZYAS): cylinder with end cut. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF B tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF B provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape B (cylinder with end cut) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.
Stainless steel
Steel
Non-ferrous metals
Cast iron
Non-woven tool for the quick change system. For fine grinding work. • Uniform surface finish • High proportion of grain binder for long lifetime • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS VLS QUICK quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK when working on paint and filler. Structure and production: The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder used with this non-woven disc ensures a particularly long lifetime. Quality: The RHODIUS VLS QUICK quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Applications: This tool is an excellent choice for jobs that require a very even surface finish or pre-polishing finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The VLS QUICK is available in the diameters of 51 mm and 76 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grit variants: coarse/100, medium/180 and fine/280. Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals
Paints/fillers
Non-woven tool for the quick change system. For fine grinding work. • Uniform surface finish • High proportion of grain binder for long lifetime • Quick tool change without bonding or sliding Machine suitability: A backing pad is required when using the RHODIUS VLS QUICK HD quick change mini non-woven disc. The quick change disc is mounted onto the backing pad in a matter of seconds. This adapter makes it possible to use the product easily on a machine with a flexible shaft drive (with angled hand piece and 6 mm spindle). The product must be used only on adjustable-speed machines and at a reduced speed. The non-woven material will melt if the speed is too high. Material suitability: This quick change disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the VLS QUICK HD when working on paint and filler. Structure and production: The non-woven disc for the quick change system is especially well-suited to fine grinding and pre-polishing work. The high proportion of grain binder plus the self-sharpening, ceramic high-performance abrasive grain used with this non-woven disc ensures a particularly long tool lifetime. Quality: The RHODIUS VLS QUICK HD quick change disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS quick change discs from the premium TOP line are recommended. Applications: This tool is an excellent choice for jobs that require a very even surface finish. The quick change system permits rapid tool changeover without sticking or slippage. Dimensions: The VLS QUICK HD is available with a diameter of 51 mm. To ensure an optimum working result and surface finish, the user can choose from the grit variants of coarse/HD (K50) or medium/HD (K80). Industries: A RHODIUS quick change disc is the perfect tool for tackling the many kinds of applications and challenges found in car repair and servicing shops, in metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by offering first-class performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, and on tempered steels and high-strength metal sheets.
Stainless steel
Steel
Non-ferrous metals
Paints/fillers
Satin finish rings for use with the matching ESD drive arbour. • Uniform surface finish • Open structure prevents clogging • Available also as set each with a satin finish ring and a mandrel Machine suitability: The satin finish ring is designed for use with a handheld drill. A matching ESD drive arbour is also required for use. Material suitability: The SAT satin finish ring has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS SAT on any of the materials listed here. Structure and production: With this satin finish ring, the open structure keeps undesirable clogging to a minimum. Also available as an all-in-one set: with a matching drive arbour and 3 satin finish rings in graded grits. Quality: This satin finish ring gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a satin finish ring, users can create a decorative surface finish that is also especially uniform and even. With the RHODIUS satin finish ring, the user can achieve an outstanding surface finish in a short space of time. At the same time, the RHODIUS SAT also offers an impressively long lifetime. Dimensions: This satin finish ring is available with a diameter of 100 mm and in the grits coarse, medium and fine. Industries: RHODIUS satin finish rings are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Polishing rings for use with the matching ESD drive arbour. • High-grade cloth • For use on angle grinders or drills • Available also as set each with a polishing ring, mandrel and 3 polishing pastes. Machine suitability: The polishing ring is suitable for use with angle grinders or handheld drills. A matching ESD drive arbour is also required for use. Material suitability: The POL polishing ring has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS POL on any of the materials listed here. Structure and production: This polishing ring is made from high-quality cloth. Also available as an all-in-one set, each consisting of a polishing ring, a matching drive arbour and 3 polishing pastes. Quality: This polishing ring gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With RHODIUS polishing rings, the user can achieve an outstanding surface finish in a short space of time. At the same time, the RHODIUS POL also offers an impressively long lifetime. In each case, the polishing paste is best applied while the machine is running. Dimensions: This polishing ring is available in the diameters of 100 mm, 150 mm and 200 mm, and in the variants of sisal, hard and soft. Industries: RHODIUS polishing rings are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. • With 6 mm support • High-grade wool felt Machine suitability: This felt polishing flap disc is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm shank socket. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 9,000, 7,000 or 6,000 rpm (depending on diameter). Material suitability: The FLP felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLP on any of the materials listed here. Structure and production: RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. The slotted flaps used on this felt polishing flap disc ensure that the polisher adapts optimally to the workpiece surface. Quality: This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing pastes for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimensions: This felt polishing flap disc is available in the diameters of 40 mm, 60 mm and 80 mm, and with flap thicknesses of 2 mm, 3 mm and 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries: RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Stainless steel end brush with knotted stainless steel wire, for use on straight grinders. With high maximum permitted revolutions. • For work on hard-to-reach areas / inside surfaces • For high brush requirements Machine suitability: The EPBZ technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: The fill material used for the EPBZ is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: The EPBZ provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the EPBZ is 0.26 mm. This end brush is available with a diameter of 20 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
Stainless steel end brush with crimped stainless steel wire, for use on straight grinders and drills. • For precision work • For flexible working • For gentle cleaning Machine suitability: The EPBW technical brush is designed for use with a handheld drill, a straight grinder or a flexible shaft drive machine with a 6 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: The fill material used for the EPBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The EPBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the EPBW is 0.30 mm. This end brush is available in the diameters of 17 mm, 25 mm and 30 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel