Search

With the DG210 ALLCUT, the user gets a real universal disc. It offers an impressively constant cutting performance in a variety of materials. The cooling holes below the segments prevent the steel core from overheating. Vacuum-brazed. Suitable for wet and dry cutting. • Versatile disc for use in a variety of materials • Constant cutting performance • Cooling holes below the segments prevent overheating • Wet and dry cutting • Vacuum-brazed Machine suitability: The DG210 ALLCUT diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG210 ALLCUT was specifically developed for processing reinforcing steel and light structural steel. This RHODIUS quality tool is also an excellent choice when working with granite, hard concrete with aggregates, marble, paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones, medium-hard masonry bricks, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles, sandstone, hollow stone blocks and soft concrete blocks. Structure and production: The DG210 ALLCUT features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG210 ALLCUT a particularly powerful tool. The disc is vacuum brazed. Quality: With the DG210 ALLCUT, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 500 mm.

The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. This enables extremely short cutting times and very clean cutting edges. At the same time, dust generation during dry cutting has been further reduced with the DG10. • Low dust generation • Continuous turbo rim enables high cutting speed • Narrow cut width for exact cuts and clean cutting edges • Usable for a wide range of materials • Developed for dry cutting Machine suitability: The DG10 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG10 has been specifically developed for processing porcelain and ceramics as well as porcelain/glazed tiles. This high-quality RHODIUS tool is also an excellent choice for processing granite, high-fired tiles and marble. Structure and production: The DG10 features a segmented turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG10 a particularly powerful tool. The disc is sintered directly. Quality: With the DG10, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 350 mm.

With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Machine suitability: The DG15 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG15 has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and production: The DG15 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 a particularly powerful tool. The disc is sintered directly. Quality: With the DG15, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.

The LD1 ensures a cool, fast and particularly precise cut – with a smooth continuous rim and clean cutting edge. At the same time, dust generation during dry cutting is reduced to a minimum. Suitable for wet and dry cutting. • Low dust generation • Extra-thin cutting disc for a high cutting speed and precise cuts • Smooth continuous rim for a clean cutting edge • Wet and dry cutting Machine suitability: The LD1 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD1 has been specifically developed for processing porcelain and ceramics as well as porcelain tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite, glazed tiles and high-fired tiles. Structure and production: The LD1 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD1 a particularly powerful tool. The disc is also laser welded. Quality: With the LD1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.

With its smooth continuous rim, the DG45 enables short cutting times, particularly smooth cutting and very clean cutting edges. The DG45 was specifically developed for dry cutting applications and shows its full potential in this area with its 10 mm high segments. • 10 mm high segments • Short cutting times • Smooth continuous rim for a clean cutting edge • Specifically developed for dry cutting Machine suitability: The DG45 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG45 has been specifically designed for working on granite, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. Structure and production: The DG45 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG45 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.

The DG25 is a electroplated special cutting disc and optimised for marble. It achieves short cutting times and a long lifetime. The DG25 makes very precise work much easier. Optimal free cut results in clean cutting edges. Suitable for wet and dry cutting. • Short cutting time • Long lifetime • Electroplated special cutting disc • Diamond bond optimised for marble • Precise cuts and clean cutting edges • Optimal free cut • Wet and dry cutting Machine suitability: The DG25 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG25 has been specifically developed for processing marble. This high-quality RHODIUS tool is also an excellent choice for processing glazed tiles. Structure and production: The DG25 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG25 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.

The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 105 mm to 250 mm.

With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with the forged segments. In addition, the steel core has cooling openings. It is particularly suited for angle grinders, table saws and petrol-driven cut-off saws. Laser-welded. Suitable for wet and dry cutting. • Extra-long lifetime due to forged segments with a height of up to 17 mm • For angle grinders, petrol-driven cut-off saws and table saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and production: The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.

The LD4 is equipped with 12 mm high turbo segments and is particularly convincing due to its excellent cutting ability in materials from granite to concrete. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height • Long lifetime • Very high cutting speed due to specially shaped turbo segments • Wet and dry cutting • Laser-welded Machine suitability: The LD4 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The LD4 has been specifically developed for processing granite, glazed clay tubes, cast tubes and slate. This RHODIUS quality tool is also an excellent choice for processing tasks involving hard concrete with aggregates, marble, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones and medium-hard masonry bricks. Structure and production: The LD4 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD4 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.

The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high segments allow fast working and clean cutting edges. Suitable for wet and dry cutting. • 10 mm segment height for a very good lifetime • Short cutting times • Continuous turbo rim enables high cutting speed and clean cutting edges • Usable on a wide range of materials from granite to concrete • Wet and dry cutting Machine suitability: The DG35 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG35 has been specifically developed for processing granite. This RHODIUS quality tool is also an excellent choice when processing hard concrete with aggregates, clay tubes, paving stones, clay roofing tiles, concrete and paving bricks, hard stone and flagstones, concrete roofing tiles and hollow stone blocks. Structure and production: The DG35 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG35 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.