Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. • For use on angle polishers • Processing of surfaces up to mirror finish • High-grade wool felt Machine suitability: This felt polishing flap disc is designed for use on an angle polisher with a 22.23 mm spindle. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 8,500 or 7,700 rpm (depending on diameter). Material suitability: The FLS felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLS on any of the materials listed here. Structure and production: RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. Quality: This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing paste for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimensions: This felt polishing flap disc is available in the diameters of 115 mm and 125 mm, and with a flap thickness of 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries: RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Polishing rings for use with the matching ESD drive arbour. • High-grade cloth • For use on angle grinders or drills • Available also as set each with a polishing ring, mandrel and 3 polishing pastes. Machine suitability: The polishing ring is suitable for use with angle grinders or handheld drills. A matching ESD drive arbour is also required for use. Material suitability: The POL polishing ring has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS POL on any of the materials listed here. Structure and production: This polishing ring is made from high-quality cloth. Also available as an all-in-one set, each consisting of a polishing ring, a matching drive arbour and 3 polishing pastes. Quality: This polishing ring gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With RHODIUS polishing rings, the user can achieve an outstanding surface finish in a short space of time. At the same time, the RHODIUS POL also offers an impressively long lifetime. In each case, the polishing paste is best applied while the machine is running. Dimensions: This polishing ring is available in the diameters of 100 mm, 150 mm and 200 mm, and in the variants of sisal, hard and soft. Industries: RHODIUS polishing rings are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Unitised disc for processing cramped areas and fillet welds. Degree of hardness: 3/4 medium; 6/7 hard. • Optimal in fillet welds • Decorative surface finish • Long lifetime Machine suitability: This unitised disc for circumferential grinding is suitable for use on an angle grinder with a 22.23 mm or 25.40 mm spindle, depending on the disc variant. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKS KN on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. Quality: The RHODIUS VKS KN unitised disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. The product is also an outstanding choice for fillet weld processing. With hardness grade 3, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKS KN unitised disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from two grits: 3S (fine) and 6A (medium). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants. Quality: The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: <p>This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm.</p> Material suitability: <p>The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here.</p> Structure and production: <p>RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants.</p> Quality: <p>The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins.</p> Dimensions: <p>The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse).</p> Industries: <p>A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.</p>
Stainless steel
Steel
Non-ferrous metals
Non-woven self fastening disc for a good surface finish. • Optimal adhesion with matching backing pad RH V through high-grade self fastening backing pad • Open structure for less clogging • Uniform surface finish Machine suitability: The RHODIUS VLS V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). However, to ensure perfect working results and a long lifetime, the speed should be reduced down to 30 to 40 m/s. The tool offers especially high performance when used with the RHODIUS RH V backing pad. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS VLS V when working on wood, paint and filler. Structure and production: This self fastening disc is made from a non-woven abrasive and a self fastening (tangled) non-woven material. The open structure ensures that the disc stays generally clog-free. Quality: The VLS V self fastening non-woven disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Applications: This tool is a great choice for jobs where a very even surface finish must be achieved. Dimensions: This self-adhesive, self fastening non-woven disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: coarse, medium and very fine. Industries: The VLS V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.
Stainless steel
Steel
Wood
Paints/fillers
Self fastening disc without hole system. • Closed coated aluminium oxide for high material abrasion • Synthetic resin bonding for long lifetime Machine suitability: The RHODIUS KERR V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results on wood with the RHODIUS KERR V. Structure and production: This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is closed-coated and bonded with a synthetic resin. An E-weight paper is used as the backing type here. Quality: The KERR V self fastening disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Applications: This tool is an ideal choice for jobs involving cleaning and de-rusting work. This is where it makes the most of its strengths: powerful stock removal and a long tool life. Dimensions: This self-adhesive, self fastening disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries: The KERR V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.
Stainless steel
Steel
Wood
With the DG210 ALLCUT, the user gets a real universal disc. It offers an impressively constant cutting performance in a variety of materials. The cooling holes below the segments prevent the steel core from overheating. Vacuum-brazed. Suitable for wet and dry cutting. • Versatile disc for use in a variety of materials • Constant cutting performance • Cooling holes below the segments prevent overheating • Wet and dry cutting • Vacuum-brazed Machine suitability: The DG210 ALLCUT diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG210 ALLCUT was specifically developed for processing reinforcing steel and light structural steel. This RHODIUS quality tool is also an excellent choice when working with granite, hard concrete with aggregates, marble, paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones, medium-hard masonry bricks, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles, sandstone, hollow stone blocks and soft concrete blocks. Structure and production: The DG210 ALLCUT features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG210 ALLCUT a particularly powerful tool. The disc is vacuum brazed. Quality: With the DG210 ALLCUT, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 500 mm.
All-round
The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. This enables extremely short cutting times and very clean cutting edges. At the same time, dust generation during dry cutting has been further reduced with the DG10. • Low dust generation • Continuous turbo rim enables high cutting speed • Narrow cut width for exact cuts and clean cutting edges • Usable for a wide range of materials • Developed for dry cutting Machine suitability: The DG10 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG10 has been specifically developed for processing porcelain and ceramics as well as porcelain/glazed tiles. This high-quality RHODIUS tool is also an excellent choice for processing granite, high-fired tiles and marble. Structure and production: The DG10 features a segmented turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG10 a particularly powerful tool. The disc is sintered directly. Quality: With the DG10, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 350 mm.
Tiles/ceramics
With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Machine suitability: The DG15 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The DG15 has been specifically developed for processing high-fired tiles. This high-quality RHODIUS tool is also an excellent choice for processing porcelain, granite, glazed tiles and marble. Structure and production: The DG15 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the DG15 a particularly powerful tool. The disc is sintered directly. Quality: With the DG15, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.
Tiles/ceramics