The LD1 ensures a cool, fast and particularly precise cut – with a smooth continuous rim and clean cutting edge. At the same time, dust generation during dry cutting is reduced to a minimum. Suitable for wet and dry cutting. • Low dust generation • Extra-thin cutting disc for a high cutting speed and precise cuts • Smooth continuous rim for a clean cutting edge • Wet and dry cutting Machine suitability: The LD1 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD1 has been specifically developed for processing porcelain and ceramics as well as porcelain tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite, glazed tiles and high-fired tiles. Structure and production: The LD1 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD1 a particularly powerful tool. The disc is also laser welded. Quality: With the LD1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
With its smooth continuous rim, the DG45 enables short cutting times, particularly smooth cutting and very clean cutting edges. The DG45 was specifically developed for dry cutting applications and shows its full potential in this area with its 10 mm high segments. • 10 mm high segments • Short cutting times • Smooth continuous rim for a clean cutting edge • Specifically developed for dry cutting Machine suitability: The DG45 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG45 has been specifically designed for working on granite, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. Structure and production: The DG45 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG45 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.
Tiles/ceramics
The DG25 is a electroplated special cutting disc and optimised for marble. It achieves short cutting times and a long lifetime. The DG25 makes very precise work much easier. Optimal free cut results in clean cutting edges. Suitable for wet and dry cutting. • Short cutting time • Long lifetime • Electroplated special cutting disc • Diamond bond optimised for marble • Precise cuts and clean cutting edges • Optimal free cut • Wet and dry cutting Machine suitability: The DG25 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG25 has been specifically developed for processing marble. This high-quality RHODIUS tool is also an excellent choice for processing glazed tiles. Structure and production: The DG25 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG25 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 105 mm to 250 mm.
Tiles/ceramics
With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with the forged segments. In addition, the steel core has cooling openings. It is particularly suited for angle grinders, table saws and petrol-driven cut-off saws. Laser-welded. Suitable for wet and dry cutting. • Extra-long lifetime due to forged segments with a height of up to 17 mm • For angle grinders, petrol-driven cut-off saws and table saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and production: The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.
Natural stone
The LD4 is equipped with 12 mm high turbo segments and is particularly convincing due to its excellent cutting ability in materials from granite to concrete. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height • Long lifetime • Very high cutting speed due to specially shaped turbo segments • Wet and dry cutting • Laser-welded Machine suitability: The LD4 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The LD4 has been specifically developed for processing granite, glazed clay tubes, cast tubes and slate. This RHODIUS quality tool is also an excellent choice for processing tasks involving hard concrete with aggregates, marble, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones and medium-hard masonry bricks. Structure and production: The LD4 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD4 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Natural stone
The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high segments allow fast working and clean cutting edges. Suitable for wet and dry cutting. • 10 mm segment height for a very good lifetime • Short cutting times • Continuous turbo rim enables high cutting speed and clean cutting edges • Usable on a wide range of materials from granite to concrete • Wet and dry cutting Machine suitability: The DG35 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG35 has been specifically developed for processing granite. This RHODIUS quality tool is also an excellent choice when processing hard concrete with aggregates, clay tubes, paving stones, clay roofing tiles, concrete and paving bricks, hard stone and flagstones, concrete roofing tiles and hollow stone blocks. Structure and production: The DG35 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG35 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Natural stone
The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry cutting. • 12 mm high segments • Wide range of applications • High cutting speed • Wet and dry cut • Laser-welded Machine suitability: The LD40 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product can be used to the full on machines from any performance class. Material suitability: The LD40 has been specifically designed for working on concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing granite, hard concrete with aggregates, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD40 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD40 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.
Concrete
Enables cutting and grinding in just one step – with a disc thickness of 1.9 mm. • Extra-thin cutting and grinding with a single disc • No disc change • Safe through three full-face fabric layers Machine suitability: For freehand use, the XTK35 CROSS cutting disc is suitable for angle grinders in any performance class. Material suitability: The XTK35 CROSS has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: This combination disc contains high-quality corundum (aluminium oxide) plus 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Sophisticated in-process controls applied during manufacturing (Made in Germany) ensure a consistently high level of quality. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27). Quality: The XTK35 CROSS gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The disc is approved for both cutting and grinding work. The XTK35 CROSS offers impressive performance, with a very aggressive cut even in solid material. A key characteristic of this disc is its extremely low level of vibration. The disc also ensures a fine surface finish. All of which makes work easier and is especially cost-effective. The XTK35 CROSS offers an ideal price/performance ratio. This high-quality RHODIUS tool is especially suitable for cutting and grinding work on structural steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and panels. Dimensions: This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm. Industries: The disc is the perfect tool for handling the many jobs and challenges facing building fitters, as well as in container construction, structural steel engineering, plumbing and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Ensures a long and gentle operating time of the battery. 10 x XT15 ACCU in the re-closable tin box. • Optimised for use with battery-powered angle grinders • High cutting speed Machine suitability: The XT15 ACCU cutting disc is suitable for freehand use with all angle grinders in any performance class (including battery-powered and low-power machines). Material suitability: The XT15 ACCU has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT15 ACCU gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT15 ACCU offers impressive performance even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, and plastic-coated sheet metal. Dimensions: The extra-thin cutting disc has a disc width of 1.0 mm, and is available in the diameters of 115 mm and 125 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel