Search

High-performance stainless steel rough grinding disc with ceramic abrasive grain. • High stock removal performance • Additional fabric flange from 180 mm diameter for use on high-frequency and compressed-air angle grinders • Grinding is very operator-friendly and non-tiring thanks to novel binder system Machine suitability: The RHODIUS RS580 EXTENDED is a grinding disc (shape 27) for angle grinders in any performance class, including high-frequency (HF) machines and air grinders. Material suitability: The RHODIUS RS580 EXTENDED has been specifically designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS580 EXTENDED grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams and for the fettling or smoothing of cast parts. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality, extremely aggressive ceramic grain (sintered corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers plus an extra, smaller flange cloth. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS580 EXTENDED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS580 EXTENDED offers an impressive and aggressive level of stock removal performance combined with a long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum. Dimensions: The RS580 EXTENDED grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction. Notice: The RHODIUS grinding discs for stainless steel are iron- and sulphur-free. However, to avoid rusting you should never change from normal steel back to stainless steel with the same abrasive disc.

High-performance grinding disc offering superior stock removal, good service life and a good price-performance ratio. • Pleasant grinding behaviour • Long lifetime • High stock removal performance Machine suitability: The RHODIUS RS38 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS38 has been specifically designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS38 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: The RS38 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended. Applications: The RS38 offers users an impressively long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum (this applies only to the variant with a disc width of 7 mm). Dimensions: The RS38 grinding disc has a disc width of 4.0 mm or 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork, and in tank, plant and pipeline construction. Notice: The RHODIUS grinding discs for stainless steel are iron- and sulphur-free. However, to avoid rusting you should never change from normal steel back to stainless steel with the same abrasive disc.

Grinding disc with special filler materials prevents clogging while ensuring efficient and continuous grinding. • High stock removal performance • No clogging of the disc • Minimum material heating Machine suitability: The RHODIUS RS24 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS24 has been developed specially for the processing of non-ferrous metals (such as aluminium, bronze and brass). The RS24 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features a high-quality abrasive grain mix of silicon carbide (SiC) and aluminium oxide (corundum) plus a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS24, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS24 offers an impressive and aggressive level of stock removal performance. Dimensions: The RS24 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops and in shipyards.

High-performance grinding disc with high bond strength for a long lifetime and powerful material abrasion. • Ideal for powerful work on steel and cast-iron • Additional fabric flange from 180 mm diameter for use on high-frequency and compressed-air angle grinders • Safe thanks to three full-face fabric layers Machine suitability: The RHODIUS RS50 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. This product really shines when used on high-performance machines in particular. Material suitability: The RHODIUS RS50 LONGLIFE has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS50 LONGLIFE grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, for fettling or smoothing cast parts, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS50 LONGLIFE, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS50 LONGLIFE offers an impressive and aggressive level of stock removal performance combined with a long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum. Dimensions: The RS50 LONGLIFE grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.

Less force required, offering a long lifetime and superior stock removal. • High stock removal performance • Long lifetime • Pleasant grinding behaviour Machine suitability: The RHODIUS RS67 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. This product really shines when used on high-performance machines in particular. Material suitability: The RHODIUS RS67 has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS67 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams as well as deburring work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: The RS67 provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS67 offers an impressive and aggressive level of stock removal performance combined with a long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum. Dimensions: The RS67 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.

Versatile rough grinding disc. Thanks to the high stock removal performance the RS2 grinds efficiently and with good service life. • Especially good for working on hard materials • High stock removal performance • Long lifetime Machine suitability: The RHODIUS RS2 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS2 has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS2 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: The RS2 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended. Applications: The RS2 offers users an impressively long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum (this applies only to the variants with disc widths of 6 to 10 mm). Dimensions: The RS2 grinding disc has a disc width of 4.0 mm to 10.0 mm, and is available in diameters from 76 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.

Grinding disc with extra fabric flange for use on high-frequency or compressed-air angle grinders, offering superior stock removal, good service life. • Especially safe through additional fabric • High stock removal performance • Good lifetime Machine suitability: The RHODIUS RS22 is a grinding disc (shape 27) for angle grinders in any performance class, including high-frequency (HF) machines and air grinders. Material suitability: The RHODIUS RS22 has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS22 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, for fettling or smoothing cast parts, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features a high-quality ceramic grain and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers plus an extra, smaller flange cloth. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: The RS22 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended. Applications: The RS22 offers users an impressively long lifetime. As a result of its topcoat of fine grain, this disc keeps chipping to a minimum. Dimensions: The RS22 grinding disc has a disc width of 8.0 mm, and is available in diameters from 180 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in steelwork and in pipeline construction.

Industry-standard disc for the cost-conscious professional, offering easy grinding and good service life. Ideal for low-power machines. • Pleasant grinding behaviour • Good stock removal • Long lifetime Machine suitability: The KSM cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The KSM has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Applications: The KSM offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting structural steel, supports, sections, panels and beams. Dimensions: The freehand cutting disc has a disc width of 3.0 mm and is available in diameters from 115 mm to 230 mm. Industries: This makes it the perfect tool for the many jobs and challenges facing building fitters, as well as in plant and container construction, foundries and fettling shops, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation.

Grinding disc for stone and also processing of grey cast iron and titanium. • Long service life • Good stock removal performance • Aggressive grinding Machine suitability: The RHODIUS RS66 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS66 has been developed specially for processing cast titanium, and for work on hard or abrasive stone. The RS66 grinding disc is an excellent choice for fettling or smoothing cast parts and for rounding off edges. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (silicon carbide) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS66, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS66 offers users an impressively long lifetime. Dimensions: The RS66 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for processing work on stone.

Zircon flap disc. Thanks to its three cut-outs, the VISION COOL becomes transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view on the workpiece • Controlled material abrasion • Cool grinding for less tarnish colours Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION COOL flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION COOL utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION COOL gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION COOL offers users an impressively long tool life. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Thermal stress on the material is minimised and less tarnish colour is produced. This is a decisive advantage when working on stainless steel or painted metal sheets. This also reduces the need for time-consuming rework on workpieces. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.