Search

Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FT24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT24 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FT24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 125 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.

Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FTK24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FTK24 has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: With the FTK24, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FTK24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. • High cutting speed • Cool cut • Easy cutting Machine suitability: The FT44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FT44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FT44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimensions: With a disc width of 2.5 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Dependable freehand cutting disc with less edge chipping. Usable in many applications. • High cutting speed • Cool cut • Easy cutting Machine suitability: The FTK44 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders. Material suitability: The FTK44 has been specially designed for concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium, aluminium and other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc includes premium SiC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: The FTK44 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: During use, the FTK44 offers an impressively aggressive cut, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. Dimensions: With a disc width of 2.0 mm and 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping and installation work.

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. • For use on angle polishers • Processing of surfaces up to mirror finish • High-grade wool felt Machine suitability: This felt polishing flap disc is designed for use on an angle polisher with a 22.23 mm spindle. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 8,500 or 7,700 rpm (depending on diameter). Material suitability: The FLS felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLS on any of the materials listed here. Structure and production: RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. Quality: This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing paste for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimensions: This felt polishing flap disc is available in the diameters of 115 mm and 125 mm, and with a flap thickness of 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries: RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Polishing rings for use with the matching ESD drive arbour. • High-grade cloth • For use on angle grinders or drills • Available also as set each with a polishing ring, mandrel and 3 polishing pastes. Machine suitability: The polishing ring is suitable for use with angle grinders or handheld drills. A matching ESD drive arbour is also required for use. Material suitability: The POL polishing ring has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS POL on any of the materials listed here. Structure and production: This polishing ring is made from high-quality cloth. Also available as an all-in-one set, each consisting of a polishing ring, a matching drive arbour and 3 polishing pastes. Quality: This polishing ring gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With RHODIUS polishing rings, the user can achieve an outstanding surface finish in a short space of time. At the same time, the RHODIUS POL also offers an impressively long lifetime. In each case, the polishing paste is best applied while the machine is running. Dimensions: This polishing ring is available in the diameters of 100 mm, 150 mm and 200 mm, and in the variants of sisal, hard and soft. Industries: RHODIUS polishing rings are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Unitised disc for processing cramped areas and fillet welds. Degree of hardness: 3/4 medium; 6/7 hard. • Optimal in fillet welds • Decorative surface finish • Long lifetime Machine suitability: This unitised disc for circumferential grinding is suitable for use on an angle grinder with a 22.23 mm or 25.40 mm spindle, depending on the disc variant. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKS KN on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. Quality: The RHODIUS VKS KN unitised disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. The product is also an outstanding choice for fillet weld processing. With hardness grade 3, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKS KN unitised disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from two grits: 3S (fine) and 6A (medium). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants. Quality: The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: <p>This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm.</p> Material suitability: <p>The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here.</p> Structure and production: <p>RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants.</p> Quality: <p>The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins.</p> Dimensions: <p>The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse).</p> Industries: <p>A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.</p>

Non-woven self fastening disc for a good surface finish. • Optimal adhesion with matching backing pad RH V through high-grade self fastening backing pad • Open structure for less clogging • Uniform surface finish Machine suitability: The RHODIUS VLS V self fastening disc is designed for use on a compatible angle grinder (shape CK 00). However, to ensure perfect working results and a long lifetime, the speed should be reduced down to 30 to 40 m/s. The tool offers especially high performance when used with the RHODIUS RH V backing pad. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS VLS V when working on wood, paint and filler. Structure and production: This self fastening disc is made from a non-woven abrasive and a self fastening (tangled) non-woven material. The open structure ensures that the disc stays generally clog-free. Quality: The VLS V self fastening non-woven disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS self fastening discs from the premium TOP line are recommended. Applications: This tool is a great choice for jobs where a very even surface finish must be achieved. Dimensions: This self-adhesive, self fastening non-woven disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: coarse, medium and very fine. Industries: The VLS V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.