Search

The DS40 is a very good choice for the cost-conscious professional. The DS40 achieves high stock removal and makes work easier thanks to efficient dust removal. • Good dust removal • Good stock removal • Good price-performance ratio Machine suitability: The DS40 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DS40 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard and medium-hard masonry bricks. Structure and production: The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS40 a particularly powerful tool. The cup wheel is also laser welded. Dimensions: This cup wheel is available in the diameters of 100 mm and 125 mm.

The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height for an even longer lifetime • High-performance cutting disc suitable for many kinds of applications • Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles • Wet and dry cut • Laser-welded Machine suitability: The LD300 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD300 X-LOCK has been specifically designed for working on hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble tiles, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone, hollow stone blocks, asphalt, green concrete and soft precast concrete blocks. This high-quality RHODIUS tool is also an excellent choice for processing paving stones, slate and concrete roofing tiles. Structure and production: The LD300 X-LOCK features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD300 X-LOCK a particularly powerful tool. The disc is also laser welded. Quality: With the LD300 X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.

Wall slot in a single step. The LD404 ALL IN ONE EXTENDED as an update to the LD402/LD403 is perfectly equipped with a combination of two-times-two diamond qualities. The turbo segments of the straight diamond cutting discs on the outside allow for particularly clean and straight wall chasing. The wave geometry of the inner diamond cutting discs gives you a perfectly clear wall slot. • No chiselling out of the middle channel required • Reduces dirt and dust • Up to 50% time savings by cutting in one operation • Enables easy chasing of wall slots (up to 30 mm) Machine suitability: The LD404 ALL IN ONE diamond disc is suitable for handheld use with a wall chaser. This product really shines when used on high-performance machines in particular. Material suitability: The LD404 ALL IN ONE has been specifically developed for processing hard masonry bricks, concrete, paving bricks, medium-hard marble shingles, hard precast concrete blocks, stone blocks and hollow stone blocks. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks and sandstone. Structure and production: The LD404 ALL IN ONE features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The segments are also arranged in a crisscross formation. The tool has been tested to EN 13236 and oSa, and can be used in dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD404 ALL IN ONE a particularly powerful tool. The disc is also laser welded and supplied fully assembled. Quality: With the LD404 ALL IN ONE, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond wall slot disc is available in the diameters of 125 mm and 150 mm.

The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry cutting. • 12 mm high segments • Wide range of applications • High cutting speed • Wet and dry cut • Laser-welded Machine suitability: The LD40 X-LOCK diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The LD40 X-LOCK has been specifically designed for working on concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing granite, hard concrete with aggregates, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD40 X-LOCK features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD40 X-LOCK a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.

Wall slot in a single step. The turbo segments of the straight diamond cutting discs on the outside allow for particularly clean and straight wall chasing. The wave geometry of the inner diamond cutting discs gives you a perfectly clear wall slot. • No chiselling out of the middle channel required • Reduces dirt and dust • Up to 50% time savings by cutting in one operation • Enables easy chasing of wall slots (up to 30 mm) Machine suitability: <p>The LD403S ALL IN ONE diamond disc is suitable for handheld use with a wall chaser. This product really shines when used on high-performance machines in particular.</p> Material suitability: <p>The LD403S ALL IN ONE has been specifically developed for processing hard masonry bricks, concrete, paving bricks, medium-hard marble shingles, hard precast concrete blocks, stone blocks and hollow stone blocks. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks and sandstone.</p> Structure and production: <p>The LD403S ALL IN ONE features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The segments are also arranged in a crisscross formation. The tool has been tested to EN 13236 and oSa, and can be used in dry cutting applications.<br>The use of a very high concentration of high-quality industrial diamonds makes the LD404 ALL IN ONE a particularly powerful tool. The disc is also laser welded and supplied fully assembled.</p> Quality: <p>With the LD403S ALL IN ONE, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>The LD403S ALL IN ONE offers quick and easy chasing of grooves and ductwork in masonry. No problematic knocking out of the middle ridge is needed. Material is removed quickly, cleanly and with virtually nothing left over. With the LD403S, operators complete their wall chasing jobs in almost half the time, benefitting from the use of a tool with excellent cutting ability and an especially long lifetime.</p> Dimensions: <p>The RHODIUS LD403S ALL IN ONE diamond cutting disc is available in the diameters of 125 mm and 150 mm. The segment height of the segmented diamond cutting discs is 12 mm for both variants. The disc enables the straightforward chasing of wall slots up to 20 mm in width.</p> Industries: <p>When combined with a wall chaser, the LD403S ALL IN ONE diamond disc is the perfect tool for the day-to-day challenges faced in the construction and plumbing trades, in interior fit-out and renovations. The tool makes work easier and considerably faster.</p>

The LD300 offers maximum performance and an optimised lifetime for a very broad range of applications ranging from medium-hard to hard materials. This product has been specially developed for angle grinder use. The 12 mm segments feature a special design that ensures the rapid transport of the cutting particles away from the disc and therefore an optimised disc lifetime. The LD300 not only offers an impressively fast cutting speed but also has an optimised lifetime. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height for an even longer lifetime • High-performance cutting disc suitable for many kinds of applications • Specially-shaped turbo segments increase cutting speed while optimising transport of cutting particles • Wet and dry cut • Laser-welded Machine suitability: The LD300 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD300 has been specifically designed for working on hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble tiles, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone, hollow stone blocks, asphalt, green concrete and soft precast concrete blocks. This high-quality RHODIUS tool is also an excellent choice for processing paving stones, slate and concrete roofing tiles. Structure and production: The LD300 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD300 a particularly powerful tool. The disc is also laser welded. Quality: With the LD300, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: <p>This diamond cutting disc is available in diameters from 115 mm to 500 mm.</p>

The positioning of the diamond segments prevents quick clogging of the cup wheel and enables excellent dust removal at the same time. • Prevents clogging • Excellent dust removal Machine suitability: The DS41 diamond cup wheel is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DS41 has been specifically developed for processing concrete and paving bricks. This high-quality RHODIUS tool is also an excellent choice for processing hard and medium-hard masonry bricks. Structure and production: The tool has been tested to EN 13236 and oSa. Use of high-quality industrial diamonds makes the DS41 a particularly powerful tool. The diamond cup wheel is also laser welded. Dimensions: This cup wheel is available in the diameters of 125 mm and 180 mm.