Search

Stationary stainless steel disc designed specifically for chop saw use. High zirconium content. Iron and sulphur free. • High cutting speed • Long service life • Easy cutting Machine suitability: On stationary machines, the ST38 cutting disc can be used with chop saws and table saws. Material suitability: The ST38 is specially designed for use on stainless steel (SST, Inox), e.g. 1.4301 (X5CrNi18-10 or 304). Structure and production: This cutting disc features a high-quality mix of zirconia and aluminium dioxide, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the ST38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the ST38 offers an impressively aggressive cut plus smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and beams. Dimensions: The stationary cutting disc has a disc width of 2.5 mm to 3.0 mm, and is available in diameters ranging from 300 mm to 400 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FT38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT38 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FT38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FTK38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FTK38 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: With the FTK38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FTK38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 100 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. • Long service life • Comfortable cutting behaviour • Easy cutting Machine suitability: For freehand use, the FT26 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT26 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium silicon carbide (SiC) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The FT26 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, supports, sections and panels. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A reliable cutting disc for the cost-conscious professional. Iron and sulphur free. • Long service life • Comfortable cutting behaviour • Easy cutting Machine suitability: For freehand use, the FTK26 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FTK26 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The FTK26 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, supports, sections and panels. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Carbide burr, shape A (ZYA): cylinder without end cut. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF A tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF A provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape A (cylinder without end cut) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape D (KUD): ball. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF D tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF D provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the double cut variant (Z 6), the user benefits both from highly aggressive stock removal as well as a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape D (ball) according to DIN 8032 is available with head diameters of 3 mm to 12.7 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape E (TRE): oval. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF E tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF E provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. Dimensions: The carbide burr with shape E (oval) according to DIN 8032 is available with head diameters of 9.6 mm to 16 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape F (RBF): ball-nosed tree. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF F tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF F provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape F (ball-nosed tree) according to DIN 8032 is available with head diameters of 3 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.

Carbide burr, shape G (SPG): tree. • Maximum concentricity • Perfectly coordinated cutting geometry ensures top-quality working results • Maximum lifetime Machine suitability: The HF G tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF G provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With this carbide burr in the single cut variant (Z 3), the user benefits both from aggressive stock removal as well as a long tool life and concentricity. The double cut variant with chip breaker (Z 6) also enables highly aggressive stock removal combined with a long tool life and concentricity. A very high surface treatment quality is also achieved. The variant featuring a special aluminium cut with large teeth and polished facets (Z ALU) also achieves excellent stock removal performance. Deposition of the working material in the chip spaces is also kept to a minimum here. With especially long-chipping materials such as soft aluminium, the use of cutting oil, paraffin or grease continues to be recommended in order to keep the negative effects of clogging to an absolute minimum. Dimensions: The carbide burr with shape G (tree) according to DIN 8032 is available with head diameters of 6 mm to 16 mm. The shaft diameter is 3 mm or 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.