Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. • Long lifetime • Quick stock removal • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LGZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality: The LGZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimensions: The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.
Stainless steel
Steel
A high-performance zircon flap disc for the cost-conscious professional. • Good lifetime • High stock removal performance • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LGZ F2 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F2 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.
Stainless steel
Steel
Quick and aggressive grinding with very high stock removal performance, thanks to a large contact surface and extra-long flaps. • Ceramic grain offers high stock removal performance • Especially suitable for hardened and tempered steel, tinder areas and titanium • Particularly good for edge grinding Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Users should match the disc to a high-power drive to get the best-possible level of performance. Material suitability: The RHODIUS JUMBO SPEED G flap disc has been specifically developed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the JUMBO SPEED G is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. The flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality: The JUMBO SPEED G gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The JUMBO SPEED G offers an impressively long tool life plus highly aggressive stock removal and a very long lifetime. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Fillet weld flap disc – the combination of a 10 mm flap projection and rigid fabric makes for a long lifetime. • High stock removal performance through ceramic grain • Optimised for fillet weld work • Optimal price-performance ratio Machine suitability: The flap disc with an extended flap projection is suitable for use on angle grinders from any performance class. Users should match the disc to a high-power drive to get the best-possible level of performance. Material suitability: The RHODIUS LGK FK flap disc has been specifically developed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the LGK FK is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. With its extended flap projection, the LGK FK is perfect for fillet weld grinding jobs. Quality: The LGK FK provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. This premium tool is perfectly suited to tackling demanding grinding work while offering an optimum price/performance ratio. During use, the LSK FK flap disc offers superior features such as 10 mm flap projection and a sturdy cloth backing. This special abrasive disc is therefore an optimal choice for quick and precise grinding of fillet welds, especially in awkward places. This disc simply lasts longer here than the competition. Dimensions: The flap disc is available with a diameter of 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
An attractively-priced flap disc with Zirconium. • Good stock removal performance • Proven quality with cotton backing • High service life Machine suitability: This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability: The RHODIUS LGZ F3 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F3 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.
Stainless steel
Steel
Ceramic grain fibre disc – the grain enables superior stock removal performance in a short period of time with a very long lifetime. • Especially suitable for hardened and tempered steels, tinder areas and titanium • Noticeable faster stock removal • Long lifetime Machine suitability: This fibre disc must be used together with a matching backing pad, such as the RHODIUS RH TURBO or the RHODIUS RH ST. Also ensure that the backing pad used has the right diameter. Material suitability: With its highly aggressive, self-sharpening ceramic grain (sintered corundum), the RHODIUS KFK fibre disc was specifically developed for processing stainless steel (e.g. V2A, 1.4301) and steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037). The disc offers a very fast and effective level of stock removal performance. Quality: The KFK gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The disc contains no iron or sulphur and offers impressively cool grinding. The RHODIUS KFK greatly reduces the formation of tarnish colouration due to heat. Dimensions: This fibre disc is available in the diameters of 115 mm to 180 mm and, depending on the individual variant, grits in the FEPA grit sizes of 24, 36, 40, 60 and 80.
Stainless steel
Steel
Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume cutting. • Cutting disc with ceramic abrasive grain • High cutting speed • Little burr formation Machine suitability: The XT100 cutting disc is suitable for freehand use on angle grinders. Material suitability: The XT100 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT100, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT100 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, especially light and fast cut. The disc features minimal sparking, low dust generation and vibration-free operation that offers exceptional stability. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This product offers an ideal price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Precise cut through 0.8 mm disc width • Little burr formation Machine suitability: The XT8 EXACT MINI cutting disc is suitable for freehand work on mini angle grinders and straight grinders, as well as on machines with a flexible shaft drive in any performance class (with ASB XT mandrel). Material suitability: The XT8 EXACT MINI has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT8 EXACT MINI gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT8 EXACT MINI offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation, smooth, vibration-free operation and very low level of burr formation. This disc also minimises tarnish colouring on the material. All of which makes work easier and is especially cost-effective. The disc is an ideal choice for cutting work on hard-to-reach locations. This high-quality RHODIUS tool is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimensions: With a disc width of 0.8 mm, the extra-thin cutting disc is available in diameters from 30 mm to 65 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Ultra high-performance thin cutting disc for the most demanding user requirements. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Long lifetime • Fewer sparks Machine suitability: The XT10 MINI cutting disc is ideal for freehand work on mini angle grinders and straight grinders, and on flexible shaft drive machines in any performance class (with ASB XT mandrel). Material suitability: The XT10 MINI has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT10 MINI, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT10 MINI offers impressive performance, thanks to its very aggressive cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. This cutting disc is the perfect tool for cutting work on hard-to-reach locations. Users enjoy an optimum price/performance ratio with the XT10 MINI. This high-quality tool from RHODIUS is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal and cable ducts. Dimensions: With a disc width of 1.0 mm and 2.0 mm, the extra-thin cutting disc is available in diameters from 50 mm to 100 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Stationary stainless steel disc designed specifically for chop saw use. High zirconium content. Iron and sulphur free. • High cutting speed • Long service life • Easy cutting Machine suitability: On stationary machines, the ST38 cutting disc can be used with chop saws and table saws. Material suitability: The ST38 is specially designed for use on stainless steel (SST, Inox), e.g. 1.4301 (X5CrNi18-10 or 304). Structure and production: This cutting disc features a high-quality mix of zirconia and aluminium dioxide, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the ST38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the ST38 offers an impressively aggressive cut plus smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and beams. Dimensions: The stationary cutting disc has a disc width of 2.5 mm to 3.0 mm, and is available in diameters ranging from 300 mm to 400 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel