Grinding wheel for use in end grinding on compressed-air grinders and electrically-powered straight grinders. Use with ASB XT. • High stock removal performance • Long lifetime • Few sparks Machine suitability: The RHODIUS SR15 is a grinding wheel (shape 1) for use on straight grinders, on flexible shaft drive machines or on air grinders with an ASB XT mandrel. Material suitability: The tool has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. This grinding wheel is an excellent choice for chamfering, for finishing work on welding seams, for fettling cast parts, and for deburring work and rounding off edges. Structure and production: The grinding wheel is manufactured to EN 12413, safety-tested and certified to oSa standards. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding wheel therefore comfortably exceeds the side load criterion of 290 N required by safety legislation. Quality: The SR15 grinding wheel gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The SR15 offers impressively high stock removal performance with a long lifetime. Sparking is also very low with this tool. Dimensions: The SR15 grinding wheel is available with a diameter of 50 mm. Industries: This grinding wheel is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, in tank, plant and pipeline construction, and also for installation work.
Steel
Zircon flap disc. Thanks to its three cut-outs, the VISION COOL becomes transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view on the workpiece • Controlled material abrasion • Cool grinding for less tarnish colours Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION COOL flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION COOL utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION COOL gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION COOL offers users an impressively long tool life. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Thermal stress on the material is minimised and less tarnish colour is produced. This is a decisive advantage when working on stainless steel or painted metal sheets. This also reduces the need for time-consuming rework on workpieces. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Non-ferrous metals
The interleaved combination of abrasive cloth and non-woven belts enables a smoother surface finish along with simultaneous stock removal, thus saving one entire work step. • Unobstructed view on the workpiece • Grinding and finish in one operation • Fine surface finish Machine suitability: This combination flap disc (coated abrasive and non-woven material) with cut-outs is suitable for use on angle grinders from any performance class. Users are recommended to drop speeds to 3–4,000 rpm when using this product. This helps to maximise the tool life. Material suitability: The RHODIUS VSK VISION was specifically developed for processing stainless steel (e.g. V2A, 1.4301). The disc also offers users an exceptionally long tool life. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VSK VISION flap disc offers a powerful combination of abrasive cloth and non-woven abrasive. The abrasive grain used in this product is high-quality aluminium oxide. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VSK VISION gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VSK VISION offers an impressively long tool life plus highly aggressive stock removal. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: This flap disc is available in the diameters of 115 mm and 125 mm.
Stainless steel
Steel
Non-ferrous metals
Standard aluminium oxide flap disc with fibre glass support. Excellent performance on steel. • Long lifetime • Quick stock removal • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LSA F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSA F1 features a high-quality aluminium oxide (corundum) abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.
Steel
Standard aluminium oxide flap disc with polyamide support. Excellent performance on steel. • Long lifetime • Quick stock removal • Vibration-reducing polyamide support Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LSA P1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The disc is manufactured and safety-tested to EN 13743, and is oSa-certified. The backing pad is made from polyamide. This enables very gentle grinding work. The LSA P1 features a high-quality aluminium oxide (corundum) abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The LSA P1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Steel
Non-woven flap disc for gentle surface treatment. • Good surface finish • Fine and flexible non-woven fibres • Tough fibre glass backing Machine suitability: <p>This non-woven flap disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. The non-woven material will melt if the speed is too high.</p> Material suitability: <p>The VLS has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VLS non-woven flap disc on any of the materials listed here.</p> Structure and production: <p>Thanks to its fine and flexible non-woven fibres, the RHODIUS VLS non-woven flap disc can be used to achieve an excellent surface finish. At the same time, the resilient fibre glass material backing gives the tool a long lifetime.</p> Quality: <p>The RHODIUS VLS non-woven flap disc gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS tools from the premium TOP line are recommended.</p> Applications: <p>This tool is a very good choice for jobs where the surface requires careful and gentle processing. Also for tasks where larger areas need to be prepared and structured, users will achieve outstanding results by using the RHODIUS VLS non-woven flap disc. In addition, the abrasive disc is also especially well-suited to removing tarnish colour, cleaning up grinding marks and for finishing work after installation.</p> Dimensions: <p>The VLS is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from several non-woven grits: coarse, medium and fine.</p> Industries: <p>A RHODIUS non-woven flap disc is the perfect tool for tackling the many kinds of applications and challenges found in plant and tank construction, in yacht building, in car repair and metalwork shops, and for installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.</p>
Stainless steel
Steel
Non-ferrous metals
Zircon flap disc offering maximum stock removal performance combined with a very long lifetime. • Maximum lifetime • Excellent stock removal performance • Tough fibre glass carrier Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LGZ F flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality: The LGZ F provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. • Long lifetime • Quick stock removal • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LSZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The LSZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimensions: The flap disc is available in diameters from 115 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 24, 40, 60, 80 and 120. Notice: RHODIUS also manufactures this flap disc for angle grinders using the X-LOCK quick change system.
Stainless steel
Steel
Zircon flap disc with fibre glass support. Excellent performance on stainless steel and optimum performance on steel. • Long lifetime • Quick stock removal • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LGZ F1 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LGZ F1 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality: The LGZ F1 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Dimensions: The flap disc is available in the diameters of 115 mm, 125 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.
Stainless steel
Steel