Search

Flap wheel with combined abrasive cloth/non-woven material. • High material abrasion with simultaneous surface finish • Good lifetime • For use on straight grinders and flexible shafts Machine suitability: The RHODIUS VSK non-woven flap wheel is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm spindle. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VSK on any of the materials listed here, while also benefitting from the product’s long tool life. Structure and production: The clever combination of abrasive cloth and non-woven material produces an outstandingly good surface finish – even on hard-to-reach places. Quality: The RHODIUS VSK non-woven flap wheel gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VSK is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. With the combined flap wheels from RHODIUS, users can prepare the workpiece optimally for polishing in just one work step. With this quality tool, users achieve two key results: high material abrasion combined with a quality surface finish. Dimensions: This non-woven flap wheel for straight grinders or for flexible shaft drive machines is available in several variants as well as in the diameters of 40 mm, 50 mm, 60 mm and 80 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grits: A60/coarse, A80/medium, A150/fine and A240/very fine. Industries: Non-woven flap wheels are the perfect tool for the many applications and challenges faced in shipbuilding and toolmaking, in car repair and metalwork shops, and in vehicle, plant or tank construction.

Non-woven flap wheel with high-quality non-woven disc for satin finishing. • Consistent finishing • Very flexible • Open structure, thus no clogging Machine suitability: The RHODIUS VS non-woven flap wheel is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm spindle. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VS on any of the materials listed here. Structure and production: This non-woven flap wheel uses a high-quality non-woven abrasive for satin finishing and is also very flexible. At the same time, the open structure also works to minimise clogging. Quality: With the RHODIUS VS non-woven flap wheel, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Users achieve a consistent finish with this high-quality tool. Dimensions: This non-woven flap wheel for straight grinders or for flexible shaft drive machines is available in several variants as well as in the diameters of 40 mm, 50 mm, 60 mm and 80 mm. To ensure an optimum working result and surface finish at all times, the user can select from several grits: coarse, medium, fine and very fine. Industries: Non-woven flap wheels are the perfect tool for the many applications and challenges faced in shipbuilding and toolmaking, in car repair and metalwork shops, and in vehicle, plant or tank construction.

Non-woven cleaning drum, for use on satin finishing machines for the removal of paints and rust. • Open structure, thus no clogging • High grain concentration for great cleaning performance • Manufactured from rings, therefore markedly longer lifetime Machine suitability: The RHODIUS SVSW non-woven cleaning abrasive drum is designed for use with a satin finishing machine. The recommended speed range for this tool is 500 to 1,000 rpm. Material suitability: The product has been designed especially for processing steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will also achieve very good results with the RHODIUS SVSW when working on wood. Structure and production: This drum has been manufactured from rings to ensure a significantly longer lifetime. At the same time, the open structure also works to minimise clogging. Quality: The SVSW non-woven cleaning abrasive drum gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS drums from the premium TOP line are recommended. Applications: This high-quality drum from RHODIUS is the tool of choice for paint and rust removal jobs. The high grain density provides a very high level of cleaning performance here. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. • Strong material abrasion with simultaneous surface finish • Long lifetime through high-density fill • Open structure, thus less clogging Machine suitability: The RHODIUS VWK drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VWK on any of the materials listed here. Structure and production: The product combines abrasive cloth with a non-woven abrasive. This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality: The VWK drum provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product offers high-performance material abrasion with simultaneous surface finishing. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of FEPA grits: A60, A80 and A150, combined with the non-woven grits of coarse, medium and fine. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Non-woven disc drum, for use with satin finishing machines. • Consistent finishing • Long lifetime through high-density fill • Open structure, thus less clogging Machine suitability: The RHODIUS VW non-woven abrasive drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VW on any of the materials listed here. Structure and production: This drum enjoys a very long lifetime thanks to its high-density coating. At the same time, the open structure also works to minimise clogging. Quality: The VW non-woven abrasive drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the perfect tool for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. The product ensures a consistent, high-quality finish. Dimensions: This non-woven abrasive drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits, including coarse, medium, fine, very fine and ultrafine. Industries: This product is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.

Cutting disc with ceramic abrasive grain. For aggressive cutting performance and a long lifetime with high-volume cutting. • Cutting disc with ceramic abrasive grain • High cutting speed • Little burr formation Machine suitability: The XT100 cutting disc is suitable for freehand use on angle grinders. Material suitability: The XT100 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc includes premium sintered corundum and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT100, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT100 offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, especially light and fast cut. The disc features minimal sparking, low dust generation and vibration-free operation that offers exceptional stability. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This product offers an ideal price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports, sections, panels and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Precise cut through 0.8 mm disc width • Little burr formation Machine suitability: The XT8 EXACT MINI cutting disc is suitable for freehand work on mini angle grinders and straight grinders, as well as on machines with a flexible shaft drive in any performance class (with ASB XT mandrel). Material suitability: The XT8 EXACT MINI has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT8 EXACT MINI gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT8 EXACT MINI offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation, smooth, vibration-free operation and very low level of burr formation. This disc also minimises tarnish colouring on the material. All of which makes work easier and is especially cost-effective. The disc is an ideal choice for cutting work on hard-to-reach locations. This high-quality RHODIUS tool is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimensions: With a disc width of 0.8 mm, the extra-thin cutting disc is available in diameters from 30 mm to 65 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ultra high-performance thin cutting disc for the most demanding user requirements. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Long lifetime • Fewer sparks Machine suitability: The XT10 MINI cutting disc is ideal for freehand work on mini angle grinders and straight grinders, and on flexible shaft drive machines in any performance class (with ASB XT mandrel). Material suitability: The XT10 MINI has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT10 MINI, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT10 MINI offers impressive performance, thanks to its very aggressive cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. This cutting disc is the perfect tool for cutting work on hard-to-reach locations. Users enjoy an optimum price/performance ratio with the XT10 MINI. This high-quality tool from RHODIUS is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal and cable ducts. Dimensions: With a disc width of 1.0 mm and 2.0 mm, the extra-thin cutting disc is available in diameters from 50 mm to 100 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ultra high-performance cutting disc for petrol-driven and electrical cutting machines. • Extra reinforcement for freehand applications • Long tool life • High cutting speed Machine suitability: The FT30 cutting disc is suitable for freehand use with petrol cut-off saws and on stationary cutting machines. Material suitability: The FT30 has been especially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT30 gives users a tool that fully meets the demanding quality requirements in manufacturing and the skilled trades. Applications: During use, the FT30 offers an impressively aggressive cut matched to smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimensions: With a disc width of 3.0 mm and 4.0 mm, this freehand cutting disc is available in the diameters of 300 mm and 350 mm. Industries: The disc is the perfect tool for the many applications and challenges faced by building fitters, as well as in plant or container construction, boiler and tank construction, structural steel engineering and pipeline construction.

Stationary stainless steel disc designed specifically for chop saw use. High zirconium content. Iron and sulphur free. • High cutting speed • Long service life • Easy cutting Machine suitability: On stationary machines, the ST38 cutting disc can be used with chop saws and table saws. Material suitability: The ST38 is specially designed for use on stainless steel (SST, Inox), e.g. 1.4301 (X5CrNi18-10 or 304). Structure and production: This cutting disc features a high-quality mix of zirconia and aluminium dioxide, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the ST38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the ST38 offers an impressively aggressive cut plus smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and beams. Dimensions: The stationary cutting disc has a disc width of 2.5 mm to 3.0 mm, and is available in diameters ranging from 300 mm to 400 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.