Search

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XT70 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT70 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines or with CERAMICON technology are recommended. Applications: During use, the XT70 offers impressive performance with its especially light and fast cut. The disc features minimal sparking, stability during use and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. High-precision, high-speed processing of thin-walled material is easily achieved. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.5 mm is available in diameters from 100 mm to 150 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

A high-performance zircon flap disc for the cost-conscious professional. • Good lifetime • High stock removal performance • Tough fibre glass backing Machine suitability: This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability: The RHODIUS LSZ F2 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers a very high level of stock removal performance. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F2 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: The flap disc is available in diameters from 100 mm to 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.

High-quality backing pad for self fastening discs. • With specialised T-hook for perfect self fastening adhesion • Especially suited to non-woven self fastening discs (VLS V) • Medium hardness Machine suitability: The RHODIUS RH V backing pad is designed for use on angle grinders equipped with an M14 spindle. This product has been specially developed for the VLS V self fastening non-woven disc. Structure and production: The tool features T-hooks that significantly improve disc fastening strength. Discs using tangled non-woven material in particular (such as the RHODIUS VLS V) stay secured in place on this backing pad. Quality: The RH V backing pad gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. For even better working results, RHODIUS backing pads from the premium TOP line are recommended. Dimensions: The high-quality backing pad for self fastening discs is available in the diameters of 115 mm, 125 mm and 150 mm, and in a medium hardness grade. The product really shows its strengths when used in combination with the RHODIUS self fastening non-woven disc (VLS V).

High-quality backing pad for self-fastening discs and polishing tools. • 3 separate hardness grades for grinding and polishing • For all paper self fastening discs without holes Machine suitability: The RHODIUS RHST V backing pad is designed for use on rotary sanders and angle grinders equipped with an M14 spindle. This product is used for all paper self fastening discs without perforation. Structure and production: The tool is available in three separate hardness grades, for grinding to polishing work. Quality: The RHST V backing pad gives users a tool that meets even the requirements for quality in manufacturing and the skilled trades. For even better working results, RHODIUS backing pads from the premium PRO or TOP lines are recommended. Dimensions: The high-quality backing pad for self fastening discs is available in the diameters of 115 mm, 125 mm and 150 mm, and in the hardness grades of hard, medium and soft. This product can be used for all paper self fastening discs without perforation.

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK70 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK70 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines are recommended. Applications: During use, the XTK70 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 150 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Rough grinding disc for the cost-conscious professional, offering easy grinding and good service life. Ideal for low-power machines. • Pleasant grinding behaviour • Good stock removal • Long service life Machine suitability: The RHODIUS RS28 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS28 has been specifically designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS28 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Applications: The RS28 offers an impressive and aggressive level of stock removal performance. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum. Dimensions: The RS28 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork, and in tank, plant and pipeline construction. Notice: The RHODIUS grinding discs for stainless steel are iron- and sulphur-free. However, to avoid rusting you should never change from normal steel back to stainless steel with the same abrasive disc.

An attractively-priced flap disc with Zirconium. • Good stock removal performance • Proven quality with cotton backing • High service life Machine suitability: This flap disc is suitable for use on angle grinders from any performance class, also including low-power machines and battery powered machines. Material suitability: The RHODIUS LSZ F3 flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc also offers users an exceptionally long tool life. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F3 utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Applications: This quality tool is perfectly suited to universal use in the workplace. Dimensions: <p>The flap disc is available in the diameters of 115 mm, 125 mm, 150 mm and 180 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60, 80 and 120.</p>

Carbide burr, shape E (TRE): oval. • High concentricity • Optimal cutting geometry ensures best work results • Long lifetime Machine suitability: The HF H Z7 tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Applications: This carbide burr as a double cut variant with chip breaker offers users a long tool life as well as high concentricity at a low price. Dimensions: The carbide burr with shape H (flame) according to DIN 8032 is available with a head diameter of 12.7 mm. The shank diameter is 6 mm.

A reliable cutting disc for the cost-conscious professional. Ideal for low-power machines. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XTK70 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK70 has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs from the premium PRO and TOP lines are recommended. Applications: During use, the XTK70 offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The disc achieves low angular deviation thanks to its depressed shape. This quality RHODIUS tool is an especially good choice for cutting structural steel, thin-walled metal sheets, rustproof and acid-proofed steels, cable ducts, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 150 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.