Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. • Reduced burr formation • High cutting speed • Fewer sparks • Low edge cavitation Machine suitability: The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.
Stainless steel
Steel
Non-ferrous metals
Stone
Cast iron
Extra-thin cutting disc offering a long lifetime and excellent price-performance ratio. • Little bur formation • High cutting speed • Fewer sparks Machine suitability: The XT38 X-LOCK cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT38 X-LOCK has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: To help make work even more cost-effective (cost per cut), RHODIUS cutting discs with CERAMICON technology are recommended. Applications: The XT38 X-LOCK offers an impressively long lifetime (tool life) during use, even in solid material, combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT38 X-LOCK offers users an optimum price/performance ratio. This quality RHODIUS tool is an especially good choice for cutting structural steel, tool steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steels, high-alloy steel, high-strength sheet metal, cable ducts, supports and sections. Dimensions: The extra-thin X-LOCK cutting disc has a disc width of 1.0 mm or 1.5 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries: This makes it the ideal tool for the many applications and challenges in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, plumbing and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Zircon flap disc. Thanks to its three cut-outs, the VISION PRO is transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view of the workpiece • Controlled material abrasion • Especially suitable for work on steel Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION PRO flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION PRO utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION PRO gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS flap discs from the premium TOP line are recommended. Applications: The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Pin for mounting the matching non-woven cleaning tools SVS GS. • With 6 or 8 mm shank Machine suitability: The RHODIUS SVS PIN is needed for mounting the RHODIUS SVS GS non-woven cleaning abrasive. This product is designed for use with a straight grinder. Dimensions: The RHODIUS SVS PIN is available with a 6 mm and 8 mm shank.
Backing pad for fibre discs – flexible to ensure optimum adjustment to the workpiece. • More flexible backing pad • Optimal adaptation to the workpiece • Pleasant grinding Machine suitability: The threaded socket for the angle grinder spindle is M14x2 or 5/8” with this backing pad. Applications: The RHST backing pad is comparatively soft and flexible, and therefore especially well-suited to the processing of concave surfaces. Dimensions: This backing pad is available in diameters from 100 mm to 180 mm.
Expanding body for abrasive sleeves with a 6 mm shank. Especially durable and stable due to high-quality rubber. • Long lifetime • Medium hardness • Ventilation for cooler grinding Machine suitability: This RHODIUS expanding body for abrasive sleeves is designed for use with a straight grinder or with a flexible shaft drive machine and a 6 mm shank spindle. Structure and production: The high-quality rubber material used here makes the product especially durable and stable. This expanding body for medium-hard abrasive sleeves also offers an ingenious system of special air vents. These keep the workpiece cooler and therefore reduce the thermal stress on the material. Quality: The SHEK expanding body gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. This product has been perfectly coordinated to the RHODIUS SSH and ESH abrasive sleeves. Dimensions: This expanding body is available in a range of variants, from 15 mm x 30 mm, 22 mm x 20 mm, 25 mm x 25 mm and 30 mm x 20 mm to 45 mm x 30 mm.
Backing pad for discs used with the quick change system. • Medium hardness Machine suitability: The RHODIUS RH QUICK backing pad is suitable for use with RHODIUS discs designed for the quick change system. Select a pad one diameter smaller if you want to use the RHODIUS SVS or VKS discs for end grinding work. Structure and production: Although this medium-hard backing pad does ensure high stock removal, it still remains flexible enough to be used for the precise processing of profiled surfaces. Quality: The RH QUICK backing pad gives users a tool that easily meets even the demanding requirements for quality in manufacturing and the skilled trades. Dimensions: The RH QUICK backing pad for a 6 mm shank spindle is available in the diameters of 25 mm, 51 mm and 76 mm, and in a medium hardness grade. The product really shows its strengths when used in combination with RHODIUS discs designed for the quick change system.
Versatile rough grinding disc. Thanks to the high stock removal performance the RS2 grinds efficiently and with good service life. • Especially good for working on hard materials • High stock removal performance • Long lifetime Machine suitability: <p>The RHODIUS RS2 X-LOCK is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class.</p> Material suitability: <p>The RHODIUS RS2 X-LOCK has been specifically designed for processing steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. The RS2 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work.</p> Structure and production: <p>The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features high-quality abrasive grain (aluminium oxide/corundum) and a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations.</p> Quality: <p>The RS2X X-LOCK gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS grinding discs from the premium TOP line are recommended.</p> Applications: <p>The RS2 X-LOCK offers users an impressively long lifetime. Thanks to its topcoat of fine grain, this disc keeps chipping to a minimum (this applies only to the variants with disc widths of 6 to 10 mm).</p> Dimensions: <p>The RS2 X-LOCK grinding disc is available in disc widths ranging from 4.0 mm to 10.0 mm. The X-LOCK discs from RHODIUS in the diameters of 115 mm and 125 mm are compatible with angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole.</p> Industries: <p>This grinding disc is the preferred choice for tasks in metalwork shops, in steelwork and shipyards, and in tank, plant and pipeline construction.</p>
Steel
Carbide burr, shape A (ZYA): cylinder without end cut. • High concentricity • Easy to guide with less aggressive stock removal • Robust tooth design ensures maximum tool life Machine suitability: The HF A PRO tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF A PRO carbide burr gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS tools from the premium TOP line are recommended. Applications: The HF A PRO tungsten carbide burr offers an impressive level of concentricity. The tool can be guided easily even for less aggressive stock removal work. High-precision milling is easy for users to achieve. Thanks to its very sturdy tooth design, the HF A PRO also offers its users a long tool life. Dimensions: The carbide burr with shape A (cylinder without end cut) according to DIN 8032 is available with head diameters of 6 mm to 12.7 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.
Stainless steel
Steel
Cast iron
Carbide burr, shape B (ZYAS): cylinder with end cut. • High concentricity • Easy to guide with less aggressive stock removal • Robust tooth design ensures maximum tool life Machine suitability: The HF B PRO tungsten carbide burr can be used with straight grinders, flexible shaft drive machines and air grinders. The recommended cutting speed is 450–600 m/min for unalloyed steels/cast steels/cast iron, and 250–350 m/min for alloyed steels/tool steels/rust- and acid-proofed steels. The recommended cutting speed for aluminium and other non-ferrous metals such as copper, brass and bronze, as well as plastics, is 700–900 m/min. Structure and production: The head is attached using a specialised brazing technique, while the teeth are cut using high-precision diamond discs on advanced CNC machines. This technique ensures an optimum and high-performance cutting geometry. Quality: The HF B PRO carbide burr gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS tools from the premium TOP line are recommended. Applications: The HF B PRO tungsten carbide burr offers an impressive level of concentricity. The tool can be guided easily even for less aggressive stock removal work. High-precision milling is easy for users to achieve. Thanks to its very sturdy tooth design, the HF B PRO also offers its users a long tool life. Dimensions: The carbide burr with shape B (cylinder with end cut) according to DIN 8032 is available with head diameters of 6 mm to 12.7 mm. The shank diameter is 6 mm. Notice: Special variants with shaft lengths of up to 400 mm are available for this tungsten carbide burr.
Stainless steel
Steel
Cast iron