Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. • With 6 mm support • High-grade wool felt Machine suitability: This felt polishing flap disc is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm shank socket. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 9,000, 7,000 or 6,000 rpm (depending on diameter). Material suitability: The FLP felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLP on any of the materials listed here. Structure and production: RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. The slotted flaps used on this felt polishing flap disc ensure that the polisher adapts optimally to the workpiece surface. Quality: This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing pastes for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimensions: This felt polishing flap disc is available in the diameters of 40 mm, 60 mm and 80 mm, and with flap thicknesses of 2 mm, 3 mm and 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries: RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.
Stainless steel
Steel
Non-ferrous metals
Tear-resistant self fastening disc with 15-hole design for processing of paints, lacquer and fillers. • Open coated, special stearate coating avoids clogging (from 180 grit) • Ideal for use together with the RH15 V backing pad • Highly tear-resistant plastic foil for long lifetime Machine suitability: The RHODIUS KSF15 V self fastening disc is designed for use with a rotary sander (shape CK 861). This creates a very high-performance tool when used with the RHODIUS RH15 V backing pad (available in 3 separate variants). Material suitability: The product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, and also aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KSF15 V on any of the materials mentioned here. Structure and production: This disc is made from an abrasive foil and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is open-coated and bonded with a synthetic resin. A tear-resistant plastic foil is used as the backing type here. This ensures a long tool lifetime. The stearate coating (used from grit 180) also prevents the disc from clogging and smearing. Quality: The KSF15 V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs involving the removal of paint, varnish and filler. The 15-hole multi-perforation ensures that sanding dust is removed constantly while working. This feature improves abrasive performance while extending the tool life of a single self fastening disc. The self fastening disc also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimensions: This self-adhesive self fastening disc is available with a diameter of 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 2000. Industries: The KSF15 V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, and installation work.
Stainless steel
Steel
Non-ferrous metals
Paints/fillers
GFRP
Extra-thin cutting disc with special fillers to prevent disc clogging. Also ideal for low-power machines. • Little bur formation • High cutting speed Machine suitability: The XT24 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT24 is specially designed for use on aluminium and other non-ferrous metals such as copper, brass, bronze, etc. as well as steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steel. Structure and production: The cutting disc uses a high-quality formulation of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT24 offers impressive performance in solid material combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT24 offers users an optimum price/performance ratio. This quality tool from RHODIUS is especially suitable for cutting thin-walled metal sheets, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This is the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and container construction, vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work.
Non-ferrous metals
Optimised, slim-line geometry with brass wire for the gentle cleaning of brake calipers. • Ergonomic and non-slip handle • Gentle cleaning Machine suitability: The BSBW brake caliper brush is used for manual brush work. Material suitability: This brush has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. and produces optimum working results on these materials. This brush is the ideal tool for removing stubborn brake dust and dirt on the disc brake caliper. Structure and production: The fill material used for the RHODIUS BSBW brake caliper brush is high-quality crimped steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush features an ergonomic, non-slip handle. This kind of tool can be used to achieve excellent cleaning results. The BSBW brake caliper brush gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This brake caliper brush is a very versatile tool. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush is also an ideal choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions: The wire thickness for the BSBW is 0.30 mm. This hand scratch brush is available with 2 rows of brush wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Non-ferrous metals
Grinding disc with special filler materials prevents clogging while ensuring efficient and continuous grinding. • High stock removal performance • No clogging of the disc • Minimum material heating Machine suitability: The RHODIUS RS24 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS24 has been developed specially for the processing of non-ferrous metals (such as aluminium, bronze and brass). The RS24 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features a high-quality abrasive grain mix of silicon carbide (SiC) and aluminium oxide (corundum) plus a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS24, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS24 offers an impressive and aggressive level of stock removal performance. Dimensions: The RS24 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops and in shipyards.
Non-ferrous metals
Zircon flap disc. Thanks to its three cut-outs, the VISION COOL becomes transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view on the workpiece • Controlled material abrasion • Cool grinding for less tarnish colours Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION COOL flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION COOL utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION COOL gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION COOL offers users an impressively long tool life. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Thermal stress on the material is minimised and less tarnish colour is produced. This is a decisive advantage when working on stainless steel or painted metal sheets. This also reduces the need for time-consuming rework on workpieces. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Non-ferrous metals
The interleaved combination of abrasive cloth and non-woven belts enables a smoother surface finish along with simultaneous stock removal, thus saving one entire work step. • Unobstructed view on the workpiece • Grinding and finish in one operation • Fine surface finish Machine suitability: This combination flap disc (coated abrasive and non-woven material) with cut-outs is suitable for use on angle grinders from any performance class. Users are recommended to drop speeds to 3–4,000 rpm when using this product. This helps to maximise the tool life. Material suitability: The RHODIUS VSK VISION was specifically developed for processing stainless steel (e.g. V2A, 1.4301). The disc also offers users an exceptionally long tool life. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VSK VISION flap disc offers a powerful combination of abrasive cloth and non-woven abrasive. The abrasive grain used in this product is high-quality aluminium oxide. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VSK VISION gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VSK VISION offers an impressively long tool life plus highly aggressive stock removal. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: This flap disc is available in the diameters of 115 mm and 125 mm.
Stainless steel
Steel
Non-ferrous metals
The ideal, long-life flap disc for grinding aluminium and other clog-prone non-ferrous metals. • Special coating of the flap belt • Notched carrier for gentle loosening • Trimmable ABS carrier Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LGA ALU flap disc has been developed specially for the processing of non-ferrous metals (aluminium, bronze and brass). The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The special backing pad is made from ABS. The disc can be trimmed easily. This means that the flap projection can be ground down as it becomes worn out over time, so that the unused grinding surface can then be used to the full. The LGA ALU features a high-quality aluminium oxide (corundum) abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. With this disc, the flaps lie flat on the disc. This flat arrangement of the flaps makes work considerably easier when an even grinding pattern is required. Quality: The LGA ALU provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The flaps also feature a special stearate coating that significantly reduces any risk of clogging for this disc. This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40 and 60.
Wood
Non-ferrous metals
Cuts tiles to leave a clean cutting edge. Good cutting performance on titanium. Also ideal for low-power machines. • Little edge chipping • High cutting speed • Low-dust cut Machine suitability: The XT66 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT66 is especially suitable for use on cast steel and concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium and cast iron (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality SIC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT66 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT66 offers impressive performance based on a very aggressive cut. High-precision processing of thin-walled material is easily achieved. A key characteristic of this disc is its extremely low level of vibration. This cutting disc makes the job easier and is particularly economical. This high-quality RHODIUS tool is an excellent choice for cutting premium tile materials and for other jobs where edge chipping needs to be kept to a minimum. Dimensions: The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This disc is the perfect tool for working on the wide range of applications and challenges in tiling, plumbing and general renovation, as well as landscaping work.
Stone
Non-ferrous metals
Freehand cutting disc with special fillers. Fillers prevent disc clogging even during prolonged use. • High cutting speed • Cool cut • No clogging Machine suitability: The FT24 cutting disc is suitable for freehand use on angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT24 has been specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the FT24 offers an impressively aggressive cut, combined with smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This quality RHODIUS tool is an especially good choice for cutting supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm and 2.5 mm, the freehand cutting disc is available in diameters from 125 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction, landscaping and installation work.
Non-ferrous metals