Search

With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with the forged segments. In addition, the steel core has cooling openings. It is particularly suited for angle grinders, table saws and petrol-driven cut-off saws. Laser-welded. Suitable for wet and dry cutting. • Extra-long lifetime due to forged segments with a height of up to 17 mm • For angle grinders, petrol-driven cut-off saws and table saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and production: The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.

The LD200 SPEED was developed for use on light joint cutter and is especially suitable for comfortable cutting of reinforced concrete and also hard concrete with aggregates. Thanks to the forged segments, the vibrations are reduced to a minimum. The LD200 SPEED is equipped with 13mm high segments and a special steel core which is Laser-welded. Suitable for wet and dry cutting. • 13 mm segment height • For light floor saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD200 SPEED diamond cutting disc is designed for freehand use with a floor saw. Material suitability: The LD200 SPEED has been specifically designed for working on hard concrete with aggregates, hard paving stones, reinforced concrete, ferroconcrete, hard stone and flagstones. Structure and production: The LD200 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD200 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD200 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 450 mm to 600 mm.

The LD45 is specifically developed for use on table saws and petrol cut-off saws. Due to its high cutting speed and long lifetime, it offers impressive performance on materials ranging from hard concrete with aggregates to soft concrete blocks. The forged segments reduce the vibrations to a minimum. Suitable for wet and dry cutting. • High cutting speed • Long lifetime • Specifically for table saws and petrol cut-off saws • Wet and dry cutting • Laser-welded Machine suitability: The LD45 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for petrol cut-off saws and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD45 has been specifically designed for working on hard concrete with aggregates, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD45 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD45 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 300 mm to 400 mm.

Unitised disc for processing cramped areas and fillet welds. Degree of hardness: 3/4 medium; 6/7 hard. • Optimal in fillet welds • Decorative surface finish • Long lifetime Machine suitability: This unitised disc for circumferential grinding is suitable for use on an angle grinder with a 22.23 mm or 25.40 mm spindle, depending on the disc variant. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKS KN on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. Quality: The RHODIUS VKS KN unitised disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. The product is also an outstanding choice for fillet weld processing. With hardness grade 3, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKS KN unitised disc is available in the diameters of 115 mm, 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from two grits: 3S (fine) and 6A (medium). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here. Structure and production: RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants. Quality: The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins. Dimensions: The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse). Industries: A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Unitised disc, for use with angle grinders. Degree of hardness: medium. • Straight or angled design • Decorative surface finish • Ling lifetime Machine suitability: <p>This unitised disc is designed for use on an angle grinder with a 22.23 mm spindle. Always use adjustable-speed angle polishers operated at a low speed to achieve the best results. The optimum speed range here is 3,600 to 4,000 rpm.</p> Material suitability: <p>The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS VKSG WS on any of the materials listed here.</p> Structure and production: <p>RHODIUS unitised discs consist of several layers of heavily compressed or hard-pressed non-woven material. This compact pressing ensures good stock removal performance and a long lifetime. The material has a high inherent strength and can also be shaped. The disc is manufactured in straight and angled variants.</p> Quality: <p>The RHODIUS VKSG WS unitised disc (and VKSS WS, angled variant) provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.</p> Applications: <p>This tool is an excellent choice for jobs that need the final surface finish to be as decorative as possible. With hardness grade 4, this tool can be used to create decorative surfaces or even out surfaces, while hardness grade 6 is used for deburring and smoothing, cleaning metal terminals or removing adhesives and synthetic resins.</p> Dimensions: <p>The VKSG WS (and VKSS WS) unitised disc is available in the diameters of 115 mm and 125 mm. To ensure an optimum working result and surface finish at all times, the user can select from a range of grits: 4S (very fine), 6S (very fine), 4S (medium) and 4A (coarse).</p> Industries: <p>A RHODIUS unitised disc is the perfect tool for tackling the many kinds of applications and challenges found in shipbuilding, car repair and metalwork shops, in plant and tank construction, and for general installation work. These tools make work easier by always offering first-class cleaning performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.</p>

Use the felt polishing flap disc with the corresponding polishing paste for pre-polishing and high-gloss polishing. • With 6 mm support • High-grade wool felt Machine suitability: This felt polishing flap disc is designed for use with a straight grinder or on a flexible shaft drive machine with a 6 mm shank socket. Always use an adjustable-speed angle polisher operated at a low speed. The maximum rated speed for this product is 9,000, 7,000 or 6,000 rpm (depending on diameter). Material suitability: The FLP felt polishing flap disc has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS FLP on any of the materials listed here. Structure and production: RHODIUS felt polishing flap discs are made from high-quality wool felt. A choice of two hardness grades is offered: H25 (soft) for high-gloss polishing and H40 (hard) for pre-polishing. The slotted flaps used on this felt polishing flap disc ensure that the polisher adapts optimally to the workpiece surface. Quality: This felt polishing flap disc gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: With a felt polishing flap disc, you can achieve surface treatment up to a mirror finish. RHODIUS felt polishing flap discs are suitable for both pre-polishing and high-gloss polishing – use the correct polishing pastes for each type of application. Important: always use a new felt polishing flap disc for each paste. Dimensions: This felt polishing flap disc is available in the diameters of 40 mm, 60 mm and 80 mm, and with flap thicknesses of 2 mm, 3 mm and 5 mm. The user can also choose a felt hardness grade of H25 or H40. Industries: RHODIUS felt polishing flap discs are the perfect tool for tackling the many jobs and challenges faced in metalwork shops, as well as in plant, boiler and tank construction. These tools make work easier by always offering first-class polishing performance on rustproof and acid-proofed steels, on high-strength and high-alloy steels, on tempered steels and high-strength metal sheets, and on non-ferrous metals and painted sheet metal.

Tear-resistant self fastening disc with 15-hole design for processing of paints, lacquer and fillers. • Open coated, special stearate coating avoids clogging (from 180 grit) • Ideal for use together with the RH15 V backing pad • Highly tear-resistant plastic foil for long lifetime Machine suitability: The RHODIUS KSF15 V self fastening disc is designed for use with a rotary sander (shape CK 861). This creates a very high-performance tool when used with the RHODIUS RH15 V backing pad (available in 3 separate variants). Material suitability: The product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – structural steel, St37, S235JR and 1.0037) and cast steels, and also aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Users will achieve very good results with the RHODIUS KSF15 V on any of the materials mentioned here. Structure and production: This disc is made from an abrasive foil and a self fastening non-woven material. The abrasive grain used here is high-performance aluminium oxide. This is open-coated and bonded with a synthetic resin. A tear-resistant plastic foil is used as the backing type here. This ensures a long tool lifetime. The stearate coating (used from grit 180) also prevents the disc from clogging and smearing. Quality: The KSF15 V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This tool is an excellent choice for jobs involving the removal of paint, varnish and filler. The 15-hole multi-perforation ensures that sanding dust is removed constantly while working. This feature improves abrasive performance while extending the tool life of a single self fastening disc. The self fastening disc also shows its strengths to the full on rustproof or acid-proofed steels, Hardox and high-strength sheet metal. Dimensions: This self-adhesive self fastening disc is available with a diameter of 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 2000. Industries: The KSF15 V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, and installation work.

Self-fastening disc suitable for removing rust and paints. An ideal product for stock removal and burr removing – welding preparation, defect correction, structuring and finishing. • Heavy F-paper backing with No-Tear technology • Closed coating with all-synthetic resin bond for stability • Fast and robust stock removal with long tool life Machine suitability: The RHODIUS ZSKP V self fastening disc is designed for use with a rotary sander (shape CK 00). This creates a very high-performance tool when used with the RHODIUS RH15 V backing pad (available in 3 separate variants). Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS ZSKP V when working on wood, paint and filler. Structure and production: This disc is made from an abrasive cloth and a self fastening non-woven material. The abrasive grain used here is an extremely high-performance zirconium. This is closed-coated and bonded with a synthetic resin. A heavy F-weight paper with no-tear technology is used as the backing type. Quality: The ZSKP V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. The disc achieves impressively fast and aggressive stock removal combined with an exceptionally long tool life. Applications: This is the ideal tool if defects need evening out, material should be removed or structured, or deburring is required. At the same time, the self fastening disc is very well-suited to the removal of rust and paint. Dimensions: This self-adhesive, self fastening disc is available in the diameters of 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 40 to 120. Industries: The ZSKP V self fastening disc is the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction, for installation work and in joinery shops.

Abrasive flap drum, for use with satin finishing machines. • Open design prevents clogging Machine suitability: The RHODIUS LW non-woven disc drum is designed for use with a satin finishing machine. Material suitability: The product has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037) and cast steel. Users will also achieve very good results with the RHODIUS LW when working on wood. Structure and production: This drum enjoys a very long lifetime thanks to its high-density coating. Quality: The LW non-woven disc drum gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This high-quality drum from RHODIUS is the tool of choice for processing tasks involving rustproof or acid-proofed steels, high-strength or high-alloy sheet metal, tool steels or tempered steels. Dimensions: This drum for satin finishing machines is available in the size 100 x 100 x 19.00. To ensure an optimum working result and surface finish at all times, the user can select from several grit levels ranging from 40 to 120. Industries: These products are the perfect tool for the many applications and challenges faced in car repair and metalwork shops, as well as for tasks in vehicle, plant and tank construction.