The LD1 ensures a cool, fast and particularly precise cut – with a smooth continuous rim and clean cutting edge. At the same time, dust generation during dry cutting is reduced to a minimum. Suitable for wet and dry cutting. • Low dust generation • Extra-thin cutting disc for a high cutting speed and precise cuts • Smooth continuous rim for a clean cutting edge • Wet and dry cutting Machine suitability: The LD1 diamond cutting disc is designed for freehand use with angle grinders. This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD1 has been specifically developed for processing porcelain and ceramics as well as porcelain tiles and marble. This high-quality RHODIUS tool is also an excellent choice for processing granite, glazed tiles and high-fired tiles. Structure and production: The LD1 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD1 a particularly powerful tool. The disc is also laser welded. Quality: With the LD1, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
With its smooth continuous rim, the DG45 enables short cutting times, particularly smooth cutting and very clean cutting edges. The DG45 was specifically developed for dry cutting applications and shows its full potential in this area with its 10 mm high segments. • 10 mm high segments • Short cutting times • Smooth continuous rim for a clean cutting edge • Specifically developed for dry cutting Machine suitability: The DG45 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG45 has been specifically designed for working on granite, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. Structure and production: The DG45 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG45 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in the diameters of 115 mm and 125 mm.
Tiles/ceramics
The DG25 is a electroplated special cutting disc and optimised for marble. It achieves short cutting times and a long lifetime. The DG25 makes very precise work much easier. Optimal free cut results in clean cutting edges. Suitable for wet and dry cutting. • Short cutting time • Long lifetime • Electroplated special cutting disc • Diamond bond optimised for marble • Precise cuts and clean cutting edges • Optimal free cut • Wet and dry cutting Machine suitability: The DG25 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG25 has been specifically developed for processing marble. This high-quality RHODIUS tool is also an excellent choice for processing glazed tiles. Structure and production: The DG25 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG25 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Tiles/ceramics
The DG50 offers an impressively good price-performance ratio. With its smooth continuous rim, it ensures clean cutting edges and is suited for universal use in tiles. Suitable for wet and dry cutting. • Smooth continuous rim for clean cutting edges • Universal application • Good price-performance ratio • Wet and dry cutting Machine suitability: The DG50 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders and for table saws (depending on diameter). This product can be used to the full on machines from any performance class, including low-power machines and battery-powered machines. Material suitability: The DG50 has been specifically developed for processing hard stone and flagstones. Structure and production: The DG50 features a continuous rim. This ensures high-precision cuts and very clean cutting edges. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG50 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 105 mm to 250 mm.
Tiles/ceramics
With its 17 mm high diamond segments, the LD410 SPEED achieves an extra-long lifetime in materials from granite to concrete. The LD410 SPEED enables particularly comfortable cutting as the vibrations have been reduced to a minimum with the forged segments. In addition, the steel core has cooling openings. It is particularly suited for angle grinders, table saws and petrol-driven cut-off saws. Laser-welded. Suitable for wet and dry cutting. • Extra-long lifetime due to forged segments with a height of up to 17 mm • For angle grinders, petrol-driven cut-off saws and table saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD410 SPEED diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD410 SPEED has been specifically designed for working on granite, marble, hard paving stones, clay roofing tiles, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones, medium-hard marble shingles and concrete roofing tiles. This high-quality RHODIUS tool is also an excellent choice for processing hard concrete with aggregates, slate, hard sand-lime bricks, hard precast concrete blocks, stone blocks, sandstone and hollow stone blocks. Structure and production: The LD410 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD410 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD410 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.
Natural stone
The LD4 is equipped with 12 mm high turbo segments and is particularly convincing due to its excellent cutting ability in materials from granite to concrete. Laser-welded. Suitable for wet and dry cutting. • 12 mm segment height • Long lifetime • Very high cutting speed due to specially shaped turbo segments • Wet and dry cutting • Laser-welded Machine suitability: The LD4 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The LD4 has been specifically developed for processing granite, glazed clay tubes, cast tubes and slate. This RHODIUS quality tool is also an excellent choice for processing tasks involving hard concrete with aggregates, marble, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, concrete and paving bricks, hard stone and flagstones, concrete tubes or kerbstones and medium-hard masonry bricks. Structure and production: The LD4 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD4 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Natural stone
The high-performance diamond cutting disc DG35 with continuous turbo rim offers an impressively long lifetime, high cutting speed and a wide range of possible applications from granite to concrete. At the same time, its 10 mm high segments allow fast working and clean cutting edges. Suitable for wet and dry cutting. • 10 mm segment height for a very good lifetime • Short cutting times • Continuous turbo rim enables high cutting speed and clean cutting edges • Usable on a wide range of materials from granite to concrete • Wet and dry cutting Machine suitability: The DG35 diamond cutting disc is designed for freehand use with angle grinders. This product can be used to the full on machines from any performance class. Material suitability: The DG35 has been specifically developed for processing granite. This RHODIUS quality tool is also an excellent choice when processing hard concrete with aggregates, clay tubes, paving stones, clay roofing tiles, concrete and paving bricks, hard stone and flagstones, concrete roofing tiles and hollow stone blocks. Structure and production: The DG35 features a turbo rim. This offers a combination of a precise cutting edge and quick cutting times. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the DG35 a particularly powerful tool. The disc is sintered directly. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 230 mm.
Natural stone
The LD200 SPEED was developed for use on light joint cutter and is especially suitable for comfortable cutting of reinforced concrete and also hard concrete with aggregates. Thanks to the forged segments, the vibrations are reduced to a minimum. The LD200 SPEED is equipped with 13mm high segments and a special steel core which is Laser-welded. Suitable for wet and dry cutting. • 13 mm segment height • For light floor saws • Special steel core with cooling openings • More comfortable cutting due to less vibrations • Wet and dry cutting • Laser-welded Machine suitability: The LD200 SPEED diamond cutting disc is designed for freehand use with a floor saw. Material suitability: The LD200 SPEED has been specifically designed for working on hard concrete with aggregates, hard paving stones, reinforced concrete, ferroconcrete, hard stone and flagstones. Structure and production: The LD200 SPEED features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. The use of a very high concentration of high-quality industrial diamonds makes the LD200 SPEED a particularly powerful tool. The disc with forged segments is also laser welded. Quality: With the LD200 SPEED, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 450 mm to 600 mm.
Concrete
The LD45 is specifically developed for use on table saws and petrol cut-off saws. Due to its high cutting speed and long lifetime, it offers impressive performance on materials ranging from hard concrete with aggregates to soft concrete blocks. The forged segments reduce the vibrations to a minimum. Suitable for wet and dry cutting. • High cutting speed • Long lifetime • Specifically for table saws and petrol cut-off saws • Wet and dry cutting • Laser-welded Machine suitability: The LD45 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for petrol cut-off saws and for table saws (depending on diameter). This product shows its strengths on machines in any performance class but especially when used on high-performance machines. Material suitability: The LD45 has been specifically designed for working on hard concrete with aggregates, hard paving stones, hard masonry bricks, reinforced concrete, ferroconcrete, concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD45 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD45 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 300 mm to 400 mm.
Concrete
The LD40 enables high cutting speeds and short cutting times on a wide range of materials from concrete to granite. The 12 mm high diamond segments of the LD40 are laser welded to the steel core of the disc. Suitable for wet and dry cutting. • 12 mm high segments • Wide range of applications • High cutting speed • Wet and dry cut • Laser-welded Machine suitability: The LD40 diamond cutting disc is designed both for freehand use and for use on a stationary machine: for angle grinders, petrol cut-off saws and table saws (depending on diameter). This product can be used to the full on machines from any performance class. Material suitability: The LD40 has been specifically designed for working on concrete, paving bricks, hard stone, flagstones, concrete tubes, kerbstones and medium-hard marble shingles. This high-quality RHODIUS tool is also an excellent choice for processing granite, hard concrete with aggregates, paving stones, hard masonry bricks, reinforced concrete and ferroconcrete, hard sand-lime bricks, hard precast concrete blocks, stone blocks, concrete roofing tiles and hollow stone blocks. Structure and production: The LD40 features a segmented rim. This enables very high cutting speeds to be achieved while also maximising tool life. The tool has been tested to EN 13236 and oSa, and can be used both in wet cutting and dry cutting applications. Use of high-quality industrial diamonds makes the LD40 a particularly powerful tool. The disc is also laser welded. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 400 mm.
Concrete