Non-woven cleaning abrasive for mounting the matching SVS PIN for removal of rust and paint. • The open structure prevents clogging • High material abrasion through high grain concentration Machine suitability: The SVS GS non-woven cleaning abrasive is designed for mounting on the matching SVS PIN. This enables use of the abrasive for circumferential grinding with a straight grinder or a handheld drill. Material suitability: This product is the ideal choice for removing rust or paint, and has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. The product can also be used to remove GFRP and body filler as well as for working on wood. Structure and production: This product gives users an especially non-aggressive tool while also benefitting from superior cleaning performance during their work. The open design prevents clogging, while the high grit concentration yields excellent results when tackling rust and paint. Quality: The SVS GS gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The RHODIUS SVS GS remains the tool of choice even for cleaning high-strength steels, metal sheets, structural and tool steels. Dimensions: The non-woven cleaning abrasive is available in the diameters of 100 mm and 150 mm. Industries: The RHODIUS SVS GS non-woven cleaning abrasive is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work.
Steel
Non-ferrous metals
Wood
Stainless steel end brush with knotted stainless steel wire, for use on straight grinders. With high maximum permitted revolutions. • For work on hard-to-reach areas / inside surfaces • For high brush requirements Machine suitability: The EPBZ technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: The fill material used for the EPBZ is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: The EPBZ provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the EPBZ is 0.26 mm. This end brush is available with a diameter of 20 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
Stainless steel end brush with crimped stainless steel wire, for use on straight grinders and drills. • For precision work • For flexible working • For gentle cleaning Machine suitability: The EPBW technical brush is designed for use with a handheld drill, a straight grinder or a flexible shaft drive machine with a 6 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. Structure and production: The fill material used for the EPBW is high-quality crimped stainless steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The EPBW provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the EPBW is 0.30 mm. This end brush is available in the diameters of 17 mm, 25 mm and 30 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
End brush with abrasive grinding bristles for processing stainless steel, steel, wood and non-ferrous metals. • Brush colour red: coarse = K80 (SIC) • Brush colour blue: fine = K180 (AO) • Also suitable for structuring wood Machine suitability: The HPB technical brush is designed for use on a handheld drill with a drill chuck. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. In addition, the brush can also be used for working on wood. Structure and production: The fill material used for the HPB is an abrasive nylon bristle that has been intermixed with the abrasive. This fill material offers superior elasticity and flexibility combined with a minimal risk of breakage. A uniform and even abrasive action is produced. This means that the brush is particularly suited to use on steel, non-ferrous metals and hard plastics that require only light deburring. Quality: The HPB gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush is also an excellent choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions: This end brush is available with a diameter of 25 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
Non-ferrous metals
Wood
Steel end brush with knotted steel wire, for use on straight grinders. With high maximum permitted revolutions. • The brush expands while machine is running • Processing of difficult to reach locations / inside surfaces • For high brush requirements Machine suitability: The SPBZ technical brush is designed for use on straight grinders or a flexible shaft drive with a 6 mm collet. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the SPBZ is high-quality knotted steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: The SPBZ provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: End brushes are the ideal tool for high-precision work on hard-to-reach areas and inside surfaces. This type of tool is often used for cleaning, de-rusting, deburring and slag removal work. This RHODIUS end brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the SPBZ is 0.35 mm. This end brush is available with a diameter of 20 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Steel
Stainless steel wheel brush with knotted stainless steel wire, for use on angle grinders. • For great cleaning performance • To remove strong scaling • For targeted work Machine suitability: The ERBZ technical brush is designed for use on angle grinders equipped with a 22.23 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum working results on these materials. Structure and production: The fill material used for the ERBZ is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: With the ERBZ, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for stainless steel is the optimum choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the ERBZ is 0.35 mm and 0.50 mm. This wheel brush is available in the diameters of 115 mm and 125 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
Stainless steel cup brush with knotted stainless steel wire, for use on angle grinders. • For great cleaning performance • To remove strong scaling • Efficient processing of large surfaces Machine suitability: The ETBZ technical brush is designed for use on angle grinders equipped with an M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum working results on these materials. Structure and production: The fill material used for the ETBZ is high-quality knotted stainless steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: With the ETBZ, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: Cup brushes are especially useful for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush for stainless steel is the ideal choice for processing rust- and acid-proofed steels, high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the ETBZ is 0.50 mm. This cup brush is available with a diameter of 65 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Stainless steel
Steel
Zircon flap disc offering maximum stock removal performance combined with a very long lifetime. • Maximum lifetime • Excellent stock removal performance • Tough fibre glass carrier Machine suitability: This flap disc is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS LSZ F EXTENDED flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The LSZ F EXTENDED utilises a high-quality zirconium abrasive grain. This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The LSZ F EXTENDED gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The LSZ F EXTENDED offers users a very long tool lifetime. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimensions: The flap disc is available in diameters from 115 mm to 150 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.
Stainless steel
Steel
Steel wire wheel brush with knotted steel wire, for use on angle grinders. • For great cleaning performance • To remove strong caking • For targeted work activities Machine suitability: The SRBZ technical brush is designed for use on angle grinders equipped with a 22.23 mm spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the SRBZ is high-quality knotted steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: The SRBZ gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: Wheel brushes are the perfect choice for processing solid or hollow rods, sections, welding seams, cutting edges, toothed wheels and grooves as well as narrow surfaces. These tools are used here in particular for roughing, deburring, edge chamfering, matt finishing, structuring, de-rusting, cleaning and slag removal. This RHODIUS wheel brush for steel is the optimum choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the SRBZ is 0.50 mm. This wheel brush is available in the diameters of 115 mm, 125 mm and 178 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Steel
Steel cup brush with knotted steel wire, for use on angle grinders. • For superior cleaning results • For removing heavy encrustations • Removable support ring for longer tool life (from 75 mm) Machine suitability: The STBZ technical brush is designed for use on angle grinders equipped with an M14 spindle. Please note the information about working and safety speeds. The maximum safety speed is marked on every product. This speed is important to ensure your safety in the workplace and must never be exceeded. Using adjustable-speed machines permits speeds to be adjusted to the maximum safe working speed. In addition, brushes fitted to handheld machines must have a maximum outer diameter of 180 mm. Material suitability: This brush has been designed especially for processing steel (structural steel – also termed St37, S235JR, 1.0037 and carbon steel) and cast steels, and produces optimum results on these materials. Structure and production: The fill material used for the STBZ is high-quality knotted steel wire. While this means that the brush is not particularly flexible, it makes it absolutely ideal for weld grinding work and the removal of heavy encrustations. Quality: The STBZ gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. To help make work even more cost-effective, RHODIUS brushes from the premium PRO line are recommended. Applications: Cup brushes are an especially good choice for the efficient processing of larger areas, welding seams and metal plates. The brushes are used in particular for cleaning, deburring, slag removal and de-rusting work here. This RHODIUS cup brush for steel is the ideal choice for processing high-strength and high-alloy steels, structural steels, tool steels, tempered steels and high-strength metal sheets. Dimensions: The wire thickness for the STBZ is 0.35 mm and 0.50 mm. This cup brush is available in the diameters of 65 mm, 75 mm, 80 mm, 100 mm and 110 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.
Steel