At 0.8 mm, this cutting disc offers an exceptionally precise, clean and almost burr-free cut. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Precise cut through 0.8 mm disc width • Little burr formation Machine suitability: The XT8 EXACT MINI cutting disc is suitable for freehand work on mini angle grinders and straight grinders, as well as on machines with a flexible shaft drive in any performance class (with ASB XT mandrel). Material suitability: The XT8 EXACT MINI has been specially designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT8 EXACT MINI gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT8 EXACT MINI offers impressive performance with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation, smooth, vibration-free operation and very low level of burr formation. This disc also minimises tarnish colouring on the material. All of which makes work easier and is especially cost-effective. The disc is an ideal choice for cutting work on hard-to-reach locations. This high-quality RHODIUS tool is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimensions: With a disc width of 0.8 mm, the extra-thin cutting disc is available in diameters from 30 mm to 65 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Ultra high-performance thin cutting disc for the most demanding user requirements. Compatible with ASB XT mandrel. • Optimal for cutting work at difficult to reach places • Long lifetime • Fewer sparks Machine suitability: The XT10 MINI cutting disc is ideal for freehand work on mini angle grinders and straight grinders, and on flexible shaft drive machines in any performance class (with ASB XT mandrel). Material suitability: The XT10 MINI has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the XT10 MINI, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XT10 MINI offers impressive performance, thanks to its very aggressive cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and exceptional, vibration-free operation. All of which makes work easier and is especially cost-effective. This cutting disc is the perfect tool for cutting work on hard-to-reach locations. Users enjoy an optimum price/performance ratio with the XT10 MINI. This high-quality tool from RHODIUS is especially suitable for cutting spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal and cable ducts. Dimensions: With a disc width of 1.0 mm and 2.0 mm, the extra-thin cutting disc is available in diameters from 50 mm to 100 mm. Industries: This is the ideal tool for tackling the many jobs and challenges faced in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Cuts tiles to leave a clean cutting edge. Good cutting performance on titanium. Also ideal for low-power machines. • Little edge chipping • High cutting speed • Low-dust cut Machine suitability: The XT66 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT66 is especially suitable for use on cast steel and concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium and cast iron (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality SIC and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT66 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT66 offers impressive performance based on a very aggressive cut. High-precision processing of thin-walled material is easily achieved. A key characteristic of this disc is its extremely low level of vibration. This cutting disc makes the job easier and is particularly economical. This high-quality RHODIUS tool is an excellent choice for cutting premium tile materials and for other jobs where edge chipping needs to be kept to a minimum. Dimensions: The extra-thin cutting disc with a disc width of 1.5 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This disc is the perfect tool for working on the wide range of applications and challenges in tiling, plumbing and general renovation, as well as landscaping work.
Stone
Non-ferrous metals
Ultra high-performance cutting disc for petrol-driven and electrical cutting machines. • Extra reinforcement for freehand applications • Long tool life • High cutting speed Machine suitability: The FT30 cutting disc is suitable for freehand use with petrol cut-off saws and on stationary cutting machines. Material suitability: The FT30 has been especially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT30 gives users a tool that fully meets the demanding quality requirements in manufacturing and the skilled trades. Applications: During use, the FT30 offers an impressively aggressive cut matched to smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This RHODIUS quality tool is an especially good choice for cutting structural steel, tool steel, high-alloy steel, supports, sections, panels and beams. Dimensions: With a disc width of 3.0 mm and 4.0 mm, this freehand cutting disc is available in the diameters of 300 mm and 350 mm. Industries: The disc is the perfect tool for the many applications and challenges faced by building fitters, as well as in plant or container construction, boiler and tank construction, structural steel engineering and pipeline construction.
Steel
High-performance cutting disc for use with petrol-driven and electrical cutting machines. • High cutting speed • Cool cut • Easy cutting Machine suitability: While suitable for freehand use with a petrol cut-off saw, the FT40 cutting disc can also be used with stationary machines. Material suitability: The FT40 has been specially designed for use on concrete products, screed, sand-lime brick, natural stone and marble, as well as titanium. Structure and production: The cutting disc includes premium silicon carbide (SiC) and 2 (400 mm: 3) full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the FT40, users get a tool that easily meets the demanding quality requirements in manufacturing and the skilled trades. Applications: The FT40 offers an impressively aggressive cut during use, combined with smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This cutting disc is the ideal choice for cutting frost-proof tiles. Dimensions: With a disc width of 3.0 mm and 4.0 mm, this freehand cutting disc is available in the diameters of 300 mm and 350 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction.
Stone
Non-ferrous metals
Stationary stainless steel disc designed specifically for chop saw use. High zirconium content. Iron and sulphur free. • High cutting speed • Long service life • Easy cutting Machine suitability: On stationary machines, the ST38 cutting disc can be used with chop saws and table saws. Material suitability: The ST38 is specially designed for use on stainless steel (SST, Inox), e.g. 1.4301 (X5CrNi18-10 or 304). Structure and production: This cutting disc features a high-quality mix of zirconia and aluminium dioxide, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: With the ST38, users receive the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the ST38 offers an impressively aggressive cut plus smooth, vibration-free operation. Precise work when processing thin-walled material is also easy to achieve. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections and beams. Dimensions: The stationary cutting disc has a disc width of 2.5 mm to 3.0 mm, and is available in diameters ranging from 300 mm to 400 mm. Industries: A perfect tool for the many applications and challenges faced by building fitters, the disc is also ideal for use in plant, boiler and tank construction, structural steel engineering and pipeline construction. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel
Stationary cutting disc with high stock removal performance. Extra exterior reinforcement for use at high working speeds. • High cutting speed • Suitable also for cast-iron parts Machine suitability: The ST56 cutting disc can be used on stationary chop saw and table saw machines. Material suitability: The ST56 is designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The ST56 gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The ST56 offers an impressively aggressive cut during use, plus smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This high-quality RHODIUS tool is especially suitable for cutting high-alloy steel as well as high-strength sheet metal, supports, sections and beams. Dimensions: With a disc width of 3.0 mm to 5.0 mm, this stationary cutting disc is available in diameters from 300 mm to 500 mm. Industries: The disc is the ideal tool for tackling the wide range of applications and challenges faced by building fitters, as well as in plant or container construction, in foundries and fettling shops, boiler and tank construction, and structural steel engineering.
Steel
Cast iron
Stationary cutting disc with high stock removal performance. Ideal for use with portable workshop machines (up to 3 kW) and chop saws. • High cutting speed • Long service life • Easy cutting Machine suitability: For stationary machines, the ST34 cutting disc can be used on chop saws and table saws. Material suitability: The ST34 has been designed especially for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037). Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Applications: During use, the ST34 offers an impressively aggressive cut, plus excellent, low-vibration operation. This cutting disc helps to make work especially cost-effective. This quality tool from RHODIUS is especially suited to cutting work on structural steel, tool steel and spring steels. Dimensions: The stationary cutting disc has a disc width of 2.5 mm to 3.0 mm, and is available in diameters ranging from 300 mm to 400 mm. Industries: This tool is an ideal choice for the many jobs and challenges faced in plant or container construction, boiler and tank construction, structural steel engineering and pipeline construction.
Steel
Heavy-duty stationary cutting disc with rugged exterior reinforcement for safe cutting. • Long lifetime • Cool cut • Easy cutting Machine suitability: The ST21 cutting disc can be used with stationary machines. Material suitability: The ST21 is specially designed for use on steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels (ductile or grey cast iron, etc.). Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Applications: During use, the ST21 offers a highly aggressive cut, as well as a long lifetime, a low level of sparking and smooth, vibration-free operation. This cutting disc helps to make work especially cost-effective. This high-quality RHODIUS tool is especially suited to cutting structural and tool steel, spring steels and high-alloy steel, as well as high-strength sheet metal, supports and sections. Dimensions: The stationary cutting disc is available with a disc width of 3.0 mm to 4.0 mm, in diameters from 300 mm to 400 mm. Industries: This is the ideal tool for the many applications and challenges faced in plant or container construction, in foundries and fettling shops, boiler and tank construction, structural steel engineering and pipeline construction.
Steel
Cast iron
High-performance freehand cutting disc for a powerful cut with maximum service life. Iron and sulphur free. • Long service life • Easy cutting • High cutting speed Machine suitability: For freehand use, the FT38 cutting disc is suitable for angle grinders as well as high-frequency (HF) machines and air grinders in any performance class. Material suitability: The FT38 has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The FT38 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The FT38 offers its users an exceptionally long lifetime (tool life), an aggressive cut, low dust generation and smooth, vibration-free operation during use. This cutting disc helps to make work especially cost-effective. This high-quality tool from RHODIUS is especially suitable for cutting structural steel, tool steel, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, supports, sections, panels and beams. Dimensions: With a disc width of 2.0 mm to 3.0 mm, the freehand cutting disc is available in diameters from 115 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges facing building fitters, as well as in plant and container construction, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.
Stainless steel
Steel