Search

Extra-thin cutting disc with special fillers to prevent disc clogging. Also ideal for low-power machines. • Little bur formation • High cutting speed Machine suitability: The XT24 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT24 is specially designed for use on aluminium and other non-ferrous metals such as copper, brass, bronze, etc. as well as steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steel. Structure and production: The cutting disc uses a high-quality formulation of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT24 gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: During use, the XT24 offers impressive performance in solid material combined with a very aggressive, light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc features minimal sparking, low dust generation and very smooth, vibration-free operation. All of which makes work easier and is especially cost-effective. The XT24 offers users an optimum price/performance ratio. This quality tool from RHODIUS is especially suitable for cutting thin-walled metal sheets, supports and sections. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 115 mm to 230 mm. Industries: This is the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and container construction, vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and installation work.

Extra-thin cutting disc offering a long lifetime and optimal price-performance ratio. • Reduced burr formation • High cutting speed • Fewer sparks • Low edge cavitation Machine suitability: The XT69 cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XT69 has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The cutting disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N (50 N from a diameter of 150 mm). The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 41). Cutting discs with a straight shape enable deeper insertion depths and therefore a greater number of cuts. Quality: The XT69 MULTI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The XT69 offers impressive performance with an aggressive cut. High-precision processing of thin-walled material is easily achieved. The disc features minimal sparking and very smooth, vibration-free operation. The XT69 MULTI makes work easier. This high-quality RHODIUS tool is an especially good choice for cutting structural steel, painted sheet metal, galvanised structural parts, cable ducts, sections and beams. Dimensions: The extra-thin cutting disc with a disc width of 1.0 mm to 1.9 mm is available in diameters from 105 mm to 230 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work.

The 0.8 mm cutting disc with ultra low-noise operation. Produces a precise and nearly burr-free cut. • Precise cut, less force required • Minimum burr formation for less rework • Cool cut reduces tarnish colours and material distortion Machine suitability: The XTK8 EXACT X-LOCK cutting disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Battery consumption is very light with this tool. The small contact area keeps energy consumption to a minimum. Material suitability: The XTK8 EXACT X-LOCK has been designed especially for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. Structure and production: The cutting disc contains high-quality corundum (aluminium oxide) and 2 full-coverage glass cloth layers. The minimum side load for the cutting disc as defined by EN 12413 and oSa is 40 N. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a straight shape (shape 42). The cutting disc is especially stable during cutting. Quality: With the XTK8 EXACT X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The XTK8 EXACT X-LOCK offers impressive performance during use with its especially light and fast cut. Precise work when processing thin-walled material is also easy to achieve. The disc stands out thanks to its minimal sparking, low dust generation and very low level of burr formation, while also minimising tarnish colouring on the material. All of which makes work easier and is especially cost-effective. This high-quality RHODIUS tool is especially suitable for cutting threaded rods, structural steel, spring steels, thin-walled metal sheets, rustproof and acid-proofed steel, high-alloy steel, high-strength sheet metal, plastic-coated and painted metal sheets, galvanised structural parts and cable ducts. Thanks to its narrow gap widths, this cutting disc is also ideal for MIG welding work and body work processing. Dimensions: The extra-thin X-LOCK cutting disc has a disc width of 0.8 mm, is available in the diameters of 115 mm and 125 mm, and is suitable for use on angle grinders from a wide range of makers. All RHODIUS discs for X-LOCK are also backwards compatible. Which means: they can also be used on a traditional angle grinder with a spindle for a 22.23 mm hole. Industries: This makes it the perfect tool for handling the many applications and challenges facing building fitters, as well as in plant and vehicle construction and bodywork, boiler and tank construction, structural steel engineering, pipeline construction and plumbing work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Ceramic grain flap disc. Thanks to its three cut-outs, the VISION SPEED is transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view of the workpiece • High-performance ceramic grain for rapid grinding without excessive force • Cool cut thanks to binder with active grinding additives Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION SPEED X-LOCK flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The abrasive grain used for the VISION SPEED X-LOCK is a high-quality ceramic grain (sintered corundum). This is self-sharpening. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 12° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: With the VISION SPEED X-LOCK, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION SPEED X-LOCK offers users impressively high stock removal performance. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and in the FEPA grit sizes of 40, 60 and 80.

Enables cutting and grinding in one step – with a disc thickness of 1.9 mm. • Extra-thin cutting and grinding with a single disc • Suitable for a variety of materials • Three full-face fabric layers for extra safety Machine suitability: The XTK69 MULTI CROSS combination disc is suitable for freehand use with all angle grinders in any performance class (including low-power and battery-powered machines). Material suitability: The XTK69 MULTI CROSS has been designed for use on stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037), cast steel and cast iron (e.g. ductile or grey cast iron, etc.), as well as titanium, concrete products, screed, sand-lime brick, natural stone and marble, and aluminium or other non-ferrous metals such as copper, brass, bronze, etc. Structure and production: The combination disc uses a high-quality mix of silicon carbide (SiC) and corundum, and 3 full-coverage glass cloth layers. For this disc, the minimum side load as defined by EN 12413 and oSa is 290 N with grinding disc approval. The expiry date (three years) is embossed in the disc hole ring. Consistently high quality is ensured by sophisticated in-process controls applied during manufacturing. To ensure a maximum level of safety, every thousandth disc is tested destructively. This disc features a depressed shape with grinding disc approval (shape 27). Quality: The XTK69 MULTI CROSS gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The disc is approved for both cutting and grinding work. The XT69 MULTI CROSS offers impressive performance with an aggressive cut. A key characteristic of this disc is its extremely low level of vibration. The XTK69 MULTI CROSS makes work easier. This quality RHODIUS tool is an especially good choice for cutting structural steel, sections and beams. Dimensions: This combination disc is approved for grinding work, and is available in a disc width of 1.9 mm, and in the diameters of 115 mm and 125 mm. Industries: This makes it the ideal tool for the many applications and challenges faced in landscaping, plumbing and building site installation work. Notice: The RHODIUS cutting discs for stainless steel are iron- and sulphur-free. To avoid rusting, you should never change from normal steel back to stainless steel with the same disc.

Thanks to the unique combination of two important product properties, the VSK VISION delivers major advantages for the surface finishing of stainless steel.It combines an alternating abrasive cloth and non-woven abrasive on one disc. This makes decorative surface finishing (non-woven abrasive) possible with simultaneous material abrasion (abrasive cloth) – saving the operator an entire process step. Optimum revolutions: 3,000–3,500 rpm • Grinding and finishing in one operation • Fine surface finish Machine suitability: The combination flap disc (coated abrasive and non-woven material) with cut-outs is suitable for use on angle grinders from any performance class. Users are recommended to drop speeds to 3–4,000 rpm when using this product. This helps to maximise the tool life. Material suitability: The RHODIUS VSK F was specifically developed for processing stainless steel (e.g. V2A, 1.4301). Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VSK F flap disc offers a powerful combination of abrasive cloth and non-woven abrasive. The abrasive grain used in this product is high-quality zirconium. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VSK F provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This premium tool is the perfect choice for demanding grinding work and offers an optimum price/performance ratio. Dimensions: The VSK F flap disc (coated abrasive and non-woven material) is available in the diameters of 115 mm and 125 mm. The grits used are A80 for the abrasive cloth and medium for the non-woven abrasive.

Optimised, slim-line geometry with brass wire for the gentle cleaning of brake calipers. • Ergonomic and non-slip handle • Gentle cleaning Machine suitability: The BSBW brake caliper brush is used for manual brush work. Material suitability: This brush has been specially designed for processing aluminium and other non-ferrous metals such as copper, brass, bronze, etc. and produces optimum working results on these materials. This brush is the ideal tool for removing stubborn brake dust and dirt on the disc brake caliper. Structure and production: The fill material used for the RHODIUS BSBW brake caliper brush is high-quality crimped steel wire. This is the fill material most commonly used for such tools, and is especially suited to light surface treatment and deburring work. The brush is particularly flexible. Quality: The hand scratch brush features an ergonomic, non-slip handle. This kind of tool can be used to achieve excellent cleaning results. The BSBW brake caliper brush gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: This brake caliper brush is a very versatile tool. Users looking to achieve superior roughing, de-rusting or cleaning results will reach immediately for this hand scratch brush. This RHODIUS hand scratch brush is also an ideal choice for processing die-cast zinc, plastics and painted metal sheets as well as wood. Dimensions: The wire thickness for the BSBW is 0.30 mm. This hand scratch brush is available with 2 rows of brush wire. Industries: This makes it the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work. Notice: The brush diameter, the length of brush filler as well as fill material density are all important factors that go towards producing optimum results for surface treatment. A longer wire length will make the brush softer and more flexible. These kinds of brushes will be an excellent choice for processing structured workpieces and for ensuring non-aggressive surface treatment. As wire length shortens, the brush can be used for more aggressive types of processing. To keep surface treatment work as efficient as possible, the best option here is to select the maximum brush diameter that can be fitted to the drive system on your tool. A high fill material density is not only essential for optimum performance but is also needed to ensure a long brush lifetime. In contrast, lower fill material densities increase the flexibility of the wire and are a better choice for processing profiled surfaces.

Non-woven cleaning abrasive on 6 mm shank for removing rust and paint. • The open structure prevents clogging • Strong material abrasion through high grain concentration Machine suitability: The SVS MINI non-woven cleaning abrasive on a 6 mm shank is designed for circumferential grinding when mounted on a straight grinder or handheld drill. Material suitability: This product is the ideal choice for removing rust or paint, and has been specially designed for processing stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels, as well as aluminium and other non-ferrous metals such as copper, brass and bronze, etc. The product achieves good to very good results when used on any of the materials listed here. The product can also be used to remove GFRP and body filler as well as for working on wood. Structure and production: This product gives users an especially non-aggressive tool while also benefitting from superior cleaning performance during their work. The open design prevents clogging, while the high grit concentration yields excellent results when tackling rust and paint. Quality: The SVS MINI gives users a tool that easily meets the demanding requirements for quality in manufacturing and the skilled trades. Applications: The RHODIUS SVS MINI remains the tool of choice even for cleaning high-strength steels, metal sheets, structural and tool steels. Dimensions: The non-woven cleaning abrasive is available with a diameter of 50 mm. Industries: The RHODIUS SVS MINI non-woven cleaning abrasive is the ideal tool for the many applications and challenges faced in car repair and metalwork shops, in plant, container, boiler and tank construction, structural steel engineering, pipeline construction and installation work – as well as for home improvers and DIYers.

Grinding disc with special filler materials prevents clogging while ensuring efficient and continuous grinding. • High stock removal performance • No clogging of the disc • Minimum material heating Machine suitability: The RHODIUS RS24 FUSION is a grinding disc (shape 27) for angle grinders in any performance class. Material suitability: The RHODIUS RS24 has been developed specially for the processing of non-ferrous metals (such as aluminium, bronze and brass). The RS24 grinding disc is an excellent choice for chamfering, welding seam preparation, for finishing work on welding seams, as well as for deburring work and rounding off edges. This tool is also suitable for surface grinding work. Structure and production: The disc is manufactured to EN 12413, safety-tested and certified to oSa standards. Every thousandth disc undergoes safety testing at almost double the normal working speed. The product features a high-quality abrasive grain mix of silicon carbide (SiC) and aluminium oxide (corundum) plus a matching phenol resin formulation, and is reinforced by three full-coverage glass cloth layers. This grinding disc therefore comfortably exceeds the side load criterion of 290 N required by safety regulations. Quality: With the RS24, users get the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The RS24 offers an impressive and aggressive level of stock removal performance. Dimensions: The RS24 grinding disc has a disc width of 7.0 mm, and is available in diameters from 115 mm to 230 mm. Industries: This grinding disc is the preferred choice for tasks in metalwork shops and in shipyards.

Zircon flap disc. Thanks to its three cut-outs, the VISION COOL becomes transparent while rotating. This enables continuous monitoring of the work result. • Unobstructed view on the workpiece • Controlled material abrasion • Cool grinding for less tarnish colours Machine suitability: This flap disc with cut-outs is suitable for use on angle grinders from any performance class. Material suitability: The RHODIUS VISION COOL flap disc has been specifically designed for processing stainless steel (e.g. V2A, 1.4301), steel (carbon steel – also termed structural steel, St37, S235JR and 1.0037) and cast steels. The disc offers an impressively long tool life here, coupled with consistently aggressive stock removal. Structure and production: The disc is manufactured to EN 13743, safety-tested and certified to oSa standards. The product features a fibre glass backing pad. Users can work at high contact pressure with this product. The VISION COOL utilises a high-quality zirconium abrasive grain. All RHODIUS flap discs are also iron- and sulphur-free. The flaps on this disc use a conical arrangement. The conical 10° layout used for the flaps here improves ergonomics during grinding and therefore makes tool handling easier. Quality: The VISION COOL gives users the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality. Applications: The VISION COOL offers users an impressively long tool life. The special ‘top size’ coating used for the flaps also ensures that grinding work stays even cooler. Thermal stress on the material is minimised and less tarnish colour is produced. This is a decisive advantage when working on stainless steel or painted metal sheets. This also reduces the need for time-consuming rework on workpieces. The three cut-outs are another ingenious feature. The disc turns transparent as it rotates, offering users a clear view of work in progress without needing to set down the tool. Users can easily see what and how much they are grinding. Dimensions: The flap disc is available in the diameters of 115 mm and 125 mm, and, depending on the variant, in the FEPA grit sizes of 40, 60 and 80.